ORIVISION Wireless Lavalier Microphone Wireless Lav Mic System with Transmitter&Receiver for Iphone Android Phone DSLR cameras Camcorder Clip on Lapel Microphone Kit for Recording Vlog Youtube.

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

ORIVISION Wireless Lavalier Microphone Wireless Lav Mic System with Transmitter&Receiver for Iphone Android Phone DSLR cameras Camcorder Clip on Lapel Microphone Kit for Recording Vlog Youtube.

Regular Price: US$113.99

Special Price US$94.99

Availability: In stock

Supplier: ORIVISION

Category: Musical Instruments Microphones & Accessories Wireless Microphones & Systems Wireless Lavalier Microphones

Qty:

Here's the brief parameters of the wireless lavalier microphone:

Type: Lavalier/Clip-on

Built in DSP: YES

Noise Cancellation: YES

Signal Transmission: 2.4GHz

Frequency Response: 2.4 - 2.4835 KHZ

Compatibility: iPhone, iPad, MAC(new), PC, DSLR, CAMCORDER, GOPRO etc.

Application: Single live, video recording, podcast etc

Mute: Yes

Volume Control Knob: Yes

Compatibility: Phone,Camera,Camcorder, Computer

On TX:

1 x type C port: for charging & monitoring.
1 x power switch key: turn on/off. It also can be MUTE key when press once during use. And press it again to turn normal.
1 x built-in Microphone
1 x noise reduction key
1 x reverberation key

On RX:

1 x power switch key: turn on/off.
1 x type C port: for charging & audio input.
1 x volume control
1 x 3.5mm jack: analog audio output & monitoring


The transmission distance of the camera mic can be up to 98 feet/30m straight in open area. The wireless lavalier microphones & systems usually covers most usage scenarios like classroom, living room, outdoor...etc.	The wireless mic can be easily charged during your break time. Charging time is around 2H and it can run up to 8-10H of battery life for long time shoots. 2x USB to type-C charging cables provide the possiblity to charge seperately for the transmitter and receiver.	For TX: There's a type C port for putting in a type C earphone. So you may do real-time monitoring and talk at the same time. For RX: The receiver has a 3.5mm headphone jack for monitoring. The photographers can check recording status and sound quality during shooting in real time.


If Recording Only: Connecting to RX with a lighting to 3.5mm cable (not included) +TRRS phone cable. Be careful that the 2 ends of TRRS cable are different. If RX Side Do Monitoring: Please connect by a lighting(male) to type C cable/convertor (female)(not included), then use type C to type C cable to connect to RX type C port. Leave 3.5mm jack for putting in headphones to do real-time mornitoring.	If Recording Only: Connecting to RX with a type C to type C cable. If RX Side Do Monitoring: Please put in a headphone to RX 3.5mm jack direct to do real-time mornitoring.	If Recording Only: Connecting to RX with TRS cable . The 2 ends of TRS cable are same. If RX Side Do Monitoring: Please connect DSLR/Camcorder to RX by a TRS cable + 3.5mm to type C cable (not included) connecting to the type C port of RX. Then the 3.5mm jack on RX is spare now for putting in headphones to do real-time mornitoring.

1. The 3.5mm TRRS Phone Cable Is Used For:

Iphone: Iphone + lighting to 3.5mm jack adpater (not included) + TRRS cable + RX
Android phones with 3.5mm jack: Android phone + TRRS cable + RX
Laptop: Laptop + TRRS cable + RX

2. The Type C to type C cable is Used For:

Android phones with type C interface: Android phone + type C to type C cable + RX

3. The 3.5mm TRS Cable Is Used For:

Camera & Camcorders & Gopro: Cameras + TRS cable + RX

Before using this product, please read the following steps carefully:

When turn on the wireless lapel microphone, after TX and RX finished paring, you will find the orange light is on on TX. That's beacuse factory default setting is on "noise reduction" after turning on. You may press again "noise reduction" key on TX to turn off the function. Then, the light of TX will change to green.
When the RX receiver indicator light is green, the receiver is in standby mode, and the connection between the RX receiver and the TX transmitter is normal.

?Free Support and Service?:Our products are backed with a 1-year limited warranty. Support remote technical service, free firmware upgrade. Please feel free to contact us(1,Find your order. 2,Click button "Contact Seller"), we will resolve your question within 24 hours. ?98FT/30m transmission & 8-10h working Time?The transmission distance can be up to 98 feet/30m straight in open area. Charging time around 2h. And once fully charged, this Wireless Lavalier Microphones & Systems can help last around 8-10h during your use. ?2.4G WIFI & Built-in DSP?This lapel microphone wireless adopts 2.4G frequency band, features stable signal transmission. it won’t be easily interfered within effective transmission distance. It has a built-in powerful DSP which can reduce noise to ensure a clear sound. ?Compatible to Most devices?The wireless microphone system is widely compatible with various devices, such as iphone, android phones, DSLR cameras, camcorders, gopro, PC, etc. Ideally suitable when you intend to giving lectures, making speeches, recording & vlogging, interview, streaming in Youtube , etc. ?2-Way Real-Time Monitoring & Lavalier?The TX of the wireless microphone system has a built-in microphone and supports omnidirectional pickup with clearer sound. Also, TX has a type-C interface for real-time monitoring. Meanwhile, RX has a 3.5mm headphone jack for monitoring, too. you may connect headphones to monitor the recording effect. TX has clip design backside, can be fixed on collar easily and quickly. ?Easy Use & Auto Pairing?The wireless microphones for cameras is easy to operate. Turn on the power switch key of receiver and transmitter, They will will automatically pair to the frequency within 3s, plug and play. No need to worry about debugging.