OPTX 20/20 HYDROTAC Stick-on Bifocal Lenses +250

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

OPTX 20/20 HYDROTAC Stick-on Bifocal Lenses +250

Regular Price: US$47.99

Special Price US$39.99

Availability: In stock

Supplier: Generic

Category: Health & Household Eye & Visual Health Reading Glasses

Qty:

Stick-On Instructions

Carefully wash the lenses of your glasses with an oil-free soap and allow them to dry.
Using warm water, place a drop of water inside the lens of your glasses where you are going to apply the Hydrotac lens.
Take a Hydrotac lens and place it on the inside of the lens, making sure the curve of the Hydrotac lens matches the curve of your glasses. Hydrotac lens can be positioned anywhere on your eyeglass lens. Hydrotac lenses should be in the same position, both horizontally and vertically on either lens of your glasses. You can reposition the lenses as long as they are still moist. Repeat this operation with the second lens.
Using a lint-free cloth, gently press the Hydrotac lenses to force out any excess water.
Wear your glasses and make sure your long distance sight is not obstructed by the Hydrotac lens.
If your line of vision is obstructed, remove the lenses using your fingernail. Reposition the lenses as instructed in Steps 2 through 4 above.
If you require the Hydrotac lenses to be smaller, use a sharp scissors to trim the lenses from the lower-curved side. Then, install the lenses as instructed in Steps 2 through 4 above.
While the lenses are fixed to your glasses, complete molecular adhesion will occur in approximately 24 hours. You can always remove Hydrotac lenses using your fingernail to lift the edge.
Hydrotac lenses do not leave any residue behind and can be removed and reused as often as you require.

PLEASE READ CAREFULLY BEFORE USE

Hydrotac lenses are created with the same magnification used to correct simple far sightedness and for reading.
Hydrotac lenses can be mounted to sunglasses, safety glasses, welding masks, diving masks, sporting glasses or any other type of eyewear.
Hydrotac lenses are not intended to be used when driving a car or motor vehicle.
Keep Hydrotac lenses out of the reach of young children.

ATTENTION

Hydrotac lenses are meant only for seeing things in close proximity or for reading. They are not designed for long-distance viewing.
There is a front and back of the Hydrotac lens. To determine the front, hold the edge of the Hydrotac lens between your finger and thumb and gently squeeze it to see which way the lens curves. The front will curve outward. This is the side that you should adhere to your glasses. Alternatively, you can lay the Hydrotac lens on a flat surface to determine which is the front side.
Ready-to-wear non-prescription glasses are not intended to replaced prescribed corrective lenses or examinations by an eye care professional. Continuous eye check-ups are necessary to determine your eye health status and vision needs.

Frequently Asked Questions & Answers

What is the recommended method to apply Hydrotac lenses? - Use lukewarm tap water generously on the eyewear lenses and the stick-on lenses. This removes any lint and dust particles which will impede the lenses from sticking. Once you place your lens on the wet eyewear lens you will use your finger to press on the center of the stick-on lens. This will push any air bubbles outward. Then use a cloth or napkin and dab all around your finger, further pushing the air bubbles out. After the lens is dry it is recommended to leave it sitting for 24 hours to complete molecular adhesion.
How do I clean the lenses? - Peel the lenses off and use a generous amount of water to clean the lenses. You may also use an oil-free dish soap. Then repeat the stick-on instructions.
Why are they not staying put? - Use a generous amount of water but do not drown your glasses in water while applying the lenses. While both lenses are wet you will press down firmly on the center and will use a cloth or napkin to press the edges around them down. Once you dry the entire lens and let them sit for a time there should be no slippage.
Are they reusable? - Yes! These are reusable. For optimal reuse quality follow the instructions on this page to keep them clean and sticking for as long as possible.
Do I put them on the inside or outside? - It is highly recommended to stick the lenses on the inside of the lens (the lens side closest to your eyes).
Which way do they go? - Find the curvature of the stick-on lens (it may be subtle, but all stick-on lenses are curved) and match that curve with the curve of your eyewear lens.
How do I get out the air bubbles? - While applying press firmly down on the center of the lens and use a cloth to push out the remaining air bubbles around it.
What should I do if it falls off? - Simply rewash and reapply, using a firmer method and letting it out to dry longer for optimal stick.
Does it matter if I have a coating on my lens? - Coatings can make the stick-on lenses harder to apply (especially anti-fog coatings). Our recommendation is to be much more attentive to the application process, spending more time being sure you properly follow the instructions to minimize any sticking issues.
Can I heat them up to stick better? - No. Hot water will cause the lenses to increase in size. Use lukewarm tap water during the application process.

bi-focal stick on lenses for men lens bifocal stickers for women readers eyewear Ladies Eye glasses

Calabria Hydrotac Stick On Bifocal Lenses Magnifying Adhesive Reading Lenses Bi-Focal Sunglass Magnifier Add On Men/Women

Unveiling a revolutionary solution to your reading and vision needs - Calabria Hydrotac Stick On Bifocal Lenses. Designed to enhance your visual experience, these lenses provide a range of magnification options from +1.25 to +3.00. Be it for reading your favorite book or scrutinizing intricate details, our lenses cater to individual needs, ensuring optimal vision and ultimate comfort.

What sets our product apart is its unobtrusive and lightweight design. These adhesive reading lenses seamlessly blend with your favorite eyewear, be it your stylish sunglasses or protective safety glasses. By integrating subtly, our lenses ensure that the aesthetics and comfort of your glasses are not compromised, providing you with a non-bulky magnification solution.

Our lenses' universal compatibility extends to all eyewear types, transforming any pair of glasses into optically correct bifocal readers. This convenient feature provides an added advantage to those who use different glasses for various activities.

With our unique reusable design, the lenses can be effortlessly removed without causing any damage or leaving behind residue. This assures the longevity of your glasses while offering a value for money bifocal solution.

Adding to the convenience, Calabria Hydrotac Stick On Bifocal Lenses are customizable to your desired fit. You can trim the lenses to the perfect shape and size for your eyewear, ensuring an ideal bifocal reading experience. Simply add water to adhere the lenses to your glasses and easily peel them off when not in use, without any residue left behind.

Experience the fusion of innovation and convenience with Calabria Hydrotac Stick On Bifocal Lenses, the ultimate magnification solution that ensures a clear and comfortable vision while maintaining the style quotient of your favorite eyewear.

Eyeglass Stickers, 1.50 Stick on Lenses, 1.00 Stick on lenses, sunglass bifocal stickers

Key Features:

Magnification Range: From +1.25 to +3.00 for personalized vision enhancement.
Lightweight Design: Thin, comfortable, and aesthetically pleasing.
Universal Compatibility: Fits all eyewear, transforming them into bifocal readers.
Reusable & Residue-Free: Easy to apply and remove without damaging your eyewear.

Reusable and Residue-Free:

A fusion of practicality and economic value. Their unique design enables easy removal, which leaves no residue and causes no damage to your eyewear. This feature ensures their longevity and contributes to their long-term value. The lenses can also be safely stored for future use, making them a convenient choice. Embrace a hassle-free and smart bifocal solution that will cater to your everyday needs.

Versatile and Personalized Vision Enhancement:

Pick from magnification options ranging from +1.25 to +3.00. These lenses have been meticulously designed to cater to your specific needs. You can now enjoy the pleasures of reading/seeing minute details with absolute comfort & ease. This ensures you have a tailored bifocal solution that can adapt to various tasks/lifestyles, marking a significant advancement in eyewear technology.

Unobtrusive and Universal Compatibility:

The unique appeal of our bifocal lenses lies in their lightweight and thin design. These qualities make them easily attachable to your favorite eyewear – be it safety glasses, stylish sunglasses, or protective goggles. The lenses' unnoticeable integration means you can continue to enjoy your eyewear's original aesthetic and comfort, but with the added advantage of versatile bifocal functionality. Our lenses open a new dimension of convenience by converting any pair of glasses into distortion-free, optically correct bifocal readers.