Description: 1.POE (Power Over Ethernet) refers to the existing Ethernet cabling infrastructure Cat. 2.It do not make any alteration of the circumstances, for a number of IP-based terminals (such as IP telephones, wireless LAN access point AP , network cameras, etc.) to transmit data signals at the same time, but also for the provision of DC power supply such equipment technology. 3.POE technology to ensure the safety of the existing structured cabling at the same time to ensure the normal operation of the existing network, minimizing costs. Specification: Voltage Input: Nominal Voltage: AC 100-240V; Variation Range: AC 90-264V. Output: DC24V / 0.5A; Output Power: 12W; Input Frequency: Nominal Frequenacy: 50-60Hz; Variation Frequenacy: 47-63Hz; Combined Load / Line Regulation: Line Regulation: ± 3%; Load Regulation: ± 5%; Operating Temperature:-10 ? ~ 40 ?, Full Load Normal operation; Storage Temperature:-10 ? ~ 85 ?, With Package; Relative Humidity:5% (0 ?) ~ 90% (40 ?) RH, 72Hrs, Full Load Normal operating. Shell material: temperature PC + ABS (90-100 ?); Pin material: copper; Fire rating: V1-V0. Network interface: RJ-45; POE port: Connect the bridge, AP, CPE equipment WAN interface Power supply: 4,5 pin positive, 7,8 pin negative; 1,2,3,6 signal pins; LAN port: Connect a router, switch, or directly connect to the host computer network interface; 1,2,3,6 signal pins. Package Included: 1 pcs NOYITO 24v 0.5A POE Power SupplyPOE port: connect the bridge, AP, CPE equipment WAN interface (power supply: 4,5 pin +, 7,8 pin -, 1,2,3,6 signal pin); LAN port: connect the router, switch or directly connected to the computer Host network interface (1, 2, 3, 6 signal pins). Compact, portable size with convenient wall plug design. Compatible with most 10 / 100Mbps IP camera, IP phone, Wireless IP point and other PoE devices. Lightning characteristics: AC input, can withstand 5KB, 8 / 20uS shock waveform, plus or minus 5 times, each time interval of 1 minute; power lightning protection circuit with failure warning function and safety protection components. Network port speed: 10M / 100Mbps. Conducted interference In line with IEEE802.3 line power supply standards. With input overvoltage protection, undervoltage protection, output overvoltage protection, output overcurrent protection, short circuit protection and other functions.