NGOODIEZ SUBLIMATION COATING FOR MUGS & HARD SUBSTATES

Our NGOODIEZ universal coating allows you to turn any regular (uncoated) mug, tumbler, glass, metal, wood and many more to sublimation ready substrate in 4 easy steps. It comes with manual instruction (scan barcode on the packaging) and step by step video demonstrating all the steps.

NGOODIEZ sublimation kit comes with everything you need to start taking your sublimation to the next level.

• 250ml of coating liquid
• 10 to 15 ml activator (catalyst) - (enough to use with 250 ml coating liquid)
• 1 x measuring cup
• 2 x stirring stick
• 2 x syringe
• 1 x foam brush

MUST READ TO ACHIEVE GREAT RESULTS

TIPS:

• This is very important: We highly recommend using Cricut mug press (not regular press). because temperature and pressure plays a major role in the result you will achieve in sublimation mug, tumblers etc. Cricut mug press features one touch settings that takes out all of your guesswork by simply turning the press on and it automatically heat up to the correct temperature every time. It applies the right amount of heat and pressure automatically to any mug from 11 to 16 oz without a single adjustment, whereas, regular mug press causes a lot issues (design fading, burning mug and poor results due to the manual pressure and temperature adjustment).
• When you are mixing activator with coating liquid (use 1:20 ratio) meaning every 1 ml of activator mix it with 20 ml of coating liquid. If you only sublimating one mug and you do not want to waste coating you can use 0.5 ml of activator and mix with 10 ml of coating.
• The kit includes a foam brush and also you can use a paint spray. If you are using foam brush, when you are applying coating, make sure to go in one direction to avoid leaving strokes on the mug.
• Keep in mind sublimation in general takes practice so do not give up in the first try. Our product had been tested on so many mugs, tumblers, wood product and it works like magic. if you are not achieving good result that you could be related to ink, sublimation paper etc.

Frequenltly Asked Questions:

Using NGOODIEZ sublimation coating will result in a dish washer safe and complete permanent design. No more worrying about your design peeling or coming off.

Q: Why the image I transfer is a little light, faded or burnt

A: There are many reasons to influence the results: ink, paper, major one is heat press temperature & pressure. recommended to use Cricut Mug press.

Q: Can I sublimate on regular mug (uncoated)

A: Yes, you can. Basically, our coating will allow you to coat any hard surfaces and turn it into sublimation ready substrate.

Q: Can I use regular printer to print my design

A: No, you CAN NOT. you will need a sublimation printer, sublimation ink and sublimation paper.

NOTICE

• Use sublimation ink, do not use regular ink, pigment ink or dye ink.
• Use sublimation paper, do not use regular paper
• Adjust the appropriate temperature according to your own equipment. Highly recommended to use Cricut mug press and NGOODIEZ sublimation paper.

Other sublimation products by NGOODIEZ