Item specifics Condition:New Features:Portable Connector B:IDE ATA SATA ATAPI Connection Split/Duplication1:1 Connector A:USB 2.0, USB Cable Length:2.5 ft Output Voltage:5 V Type:Adapter/Converter Color:Black DEVICE INSTALLATION: Hardware Install: 1. Confirm the device is under master mode. 2. Connect SATA/IDE connector to SATA/IDE device. 3. Connect AC power to SATA/IDE device. 4. Connect the cable to the USB port of the computer. Driver Install: 1. Window98: Insert Driver CD to CDROM and run X:\win98\setup.exe before you insert the cable to your computer. 2. Windows2000/me/XP: You don't need to install any driver. 3. Mac 8.6 or higher: Copy Fene USB SATA/IDE_05E3_0702. sit to desk to desk to pand double click it to get driver file. Then copy the driver file to [System Folder][Extensions]. After that, connect the cable to the computer and reboot the system. PRODUCT FEATURE: * Connect to the IDE device using USB interface and SATA device too * USB 2.0 standard, Full speed, 480M bps full speed * Transfer rate up to 480MBps (USB 2.0 specification), limit depending on the IDE device/SATA device and the driver * USB 1.1 device interface can be used, (Backward compatible to USB 1.1) * Complies with ATA/ATAPI-66 Specification 1.0 * Easy to use and plug & play * Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) * External power adapter included, for power up the 12V IDE/ATAPI devices Usage * For easy connect to the IDE device / SATA device and make the hard disk device more portable Package Include: 1. USB to IDE/SATA cable 2. SATA Cable/SATA Power Connector 3. Power adapter(AC110V-240V) 4. Power cord 5. CD Driver See more

Components:1. USB to SATA/IDE cable: used to connect SATA/IDE device to computer with USB port.2. Power with 12V channel output: used to supply power to SATA/IDE device. NOTE: The power supply and switch are only for 12V devices. 5V devices don't need to plug the power supply, so if you connect the power supply when using the 5V devices, the power switch will NOT work!. The Hi-Speed USB interface provides for easy installation with its Plug and Play design. The ide to USB adapter supports all existing IDE/ATAPI devices such as a CD-ROM, CD-RW, DVD-ROM, and 2.5 and 3.5 IDE and SATA hard drives. This USB hard drive adapter could turn any standard IDE or SATA drive into a convenient external drive. Easily transfer files from computer or notebook, backup files, or store large file archives on hard drives. This USB 2.0 to IDE / SATA drive adapter implements a bridge between a USB port and one SATA, ATA or ATAPI based mass storage device port.