Our Suspension Boom Stand is made of steel and provides a sturdy platform to hold microphones in place for the duration of a recording session. The arm is strong enough to support 2 pounds of weight and the rugged construction means it won't transfer vibrations to the microphone, causing audio noise. The microphone arm was designed to provide users with as much flexibility as possible. The metal C-clamp is large enough to fit onto surfaces up to 1.9in thick and the pressure can be adjusted quickly and easily using the metal spindle. The clamp is padded to prevent damage to the surface it's attached to, as well. The arm can extend up to 33in. At the end of the mic arm is a nut with 3/8inx16 threading and there's a 3/8in to 5/8in adapter included, so a wide range of microphone clips and shock mounts can be used.

The arm can extend up to 33in. The clamp is padded to prevent damage to the surface it's attached to. The metal C-clamp is large enough to fit onto surfaces up to 1.9in thick and the pressure can be adjusted quickly and easily using the metal spindle. 3 feet of the cable is integrated into the scissor stand, leaving over 6 feet of cable to interface with your computer or recording hardware. Tension adjustments are located at all pivot points. This ensures that your boom stand stays in any position you put it, allowing you and your guest the freedom and comfort to move about and keep the mic in front of you.