A professional brand for screen repair kits, the perfect choice for solving all your screen issues.

To repair your phone with this iPhone 12 Pro Max screen repair kit, everything you will need was included in this kit.

Package includes:

1) 1 * High-Quality Front LCD Digitizer Screen Replacement for iPhone 12 Pro Max

2) Repair Tools

--1 *Pentalobe Screwdriver, 1 * Phillips screwdriver, 1 * Tri-point Y Screwdriver

--3 * Pry Tools

--1 *Suction Cup, --1 *Dust Wipe[wet and dry]

--1 *Sim Card Pin, --1 *Tweezers

3) 1 * Screen Protector for iPhone 12 Pro Max

4) 1 * Waterproof Seal

5) 1 * Magnetic Screw Mat

Fit for models iPhone 12 Pro Max (A2342, A2410, A2412, A2411)

KIND NOTES:

1)DISCONNECT THE BATTERY CABLE FIRST!

2)Plz insert the screwdriver head 90°vertically into the head when twisting it, otherwise, the screws may be stripped.

3)Make sure ALL the connectors are plugged in properly, there will be a "click" sound.

4)Make sure the metal plate over the connectors is settled properly, not too tight or too loose.

5)Test the screen first after connecting all cables, make sure everything is good before installing it on the phone.

6)Please be careful when installing the original front camera and sensors to make sure the Face ID work after screen replacement.

Every iPhone 12 Pro Max screen replacement frame assembly is strictly tested before being sent.

FAQ

1) What can I do to retain the Face ID of my phone?

1. Face ID only works with the original front camera and sensors assembly for user protection, you have to install the original iPhone 12 Pro Max digitizer screen components on our screen correctly.

2. If the Face ID doesn’t work after using the screen installation, please make sure all the parts are put in the correct places, and reset the Face ID on the setting then do a hard reset.

2) There are black/white dots or lines on the LCD iPhone 12 Pro Max touch screen, what should I do?

This may be caused during transportation, incorrect installation, or incorrect usage of the screen, please do not press too hard on the screen or drop it during installation or daily use.

3) Why does the touch function can't work properly after connecting all the cables?

The touch issue might be caused because the cables are not installed correctly. Please try to unplug all the connectors on the logic board. Then use dust wipes or cotton swabs to wipe all the sockets carefully and reinstall the screen. Make sure you connect all the connectors correctly with a "click" sound and make sure the metal plate over the connectors of the LCD digitizer for iPhone 12 Pro Max is screwed down properly.

Please come to us with your questions first if you need more assistance with the iPhone 12 Pro Max replacement screen you received.