The fiber switch is a DIN rail PoE Switch that supports external SFP Modules and meets EN55022 standard.The Ethernet ports support high power PoE (Power Sourcing Equipment) which complies with IEEE802.3at standard, and it also supports half-duplex andfull-duplex mode. The Media Converter supports 10/100/1000Base-T and 100/1000Base-X SFP Port. Users can use different type of SFP modules (single-mode/multi-mode fiber,1/2 core) as needed.

Features:

• 2-port 10/100/1000 BASE-T RJ45 with auto MDI / MDI-Xfunction
• 2 SFP Port, 100Base-FX or 1000Base-X dual mode(auto detection)
• Supports IEEE802.3af PoE (15.4W) or IEEE802.3atPoE+ (30W)
• Supports Link Fault Pass Through
• Supports Full/Half-duplex, Auto-negotiation
• 9K Bytes Jumbo Frame
• Power booster function with wide range 12~48VDC Power Input
• Supports DIN-Rail & Wall-mount installation
• Environmentally hardened -40°C to 75°C
• (-40°F to 167°F) operating temperature

Specifications:

Connector: 2 x RJ45 (PoE Port)

Optical Port: 2 x SFP 1000Base-X or 100Base-FX(auto detection)

Forward Filter Rate: 14,880pps (10Mbps); 148,800pps(100Mbps); 1,488,000pps (1000Mbps)

Input Power: 12~48VDC, 4-pin terminal block

Dimensions (WxDxH): 95 x 70 x 30 mm (3.74 x 2.76 x1.18 inches)

Weight: 0.25Kg (0.55lb)

Casing: Aluminum Case

Mounting Options: DIN-Rail / Wall-mount

Packages:

1*PoE switch 30W

1*PoE switch user manual

1*L-shaped wall mount bracket

Note

SFP module and power supply are to be purchased separately.

Open wire for terminal block. Recommend 75W (1.6A/48V) and above DC power supplies.