MEIRIYFA TYPEC PoE splitter, with RJ45 port and Type C port. It is an economical and practical PoE remote power equipment base on IEEE802.3af standard. It can separate the power and data via cable transmission. Proper matching use with poe switch or PSE injector which meet standard IEEE802.3af, Provides power and data at the same time for the terminal device does not support PoE. Specifications: Input: 48-57V DC max. Output: DC5V, 2.4A 12W Max. DC Jack: USB Type C. Interface Type: 1 Input RJ45 port, 1 output RJ45 port, 1 DC output(Type-C). Support international standard IEEE802.3 af; POE port Support 10/100Mdata transmission. Power Pin: Support both 1/2(+),3/6(-) or 4/5(+),7/8(-). Operating Ambient Temperature: -20 to 60?. Package Content: 1x Type C PoE Splitter.

✓Application: Works with non-PoE network devices that require a 5V dc input with Type-C port and a ethernet input, *PLEASE NOTE: this spitter is only compatible with 10/100Mbps Non-PoE devices, it DOES NOT support gigabit Non-PoE devices. ✓Support the isolation circuit protection, can effectively protect electrical equipment; Support the short circuit, overvoltage protection, Protect your cable safety. ✓Plug and Play: Require no other configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet. ✓This Type C POE Splitter base on IEEE802.3af standard and can separate the power and data via cable transmission. Proper matching use with POE switch or PSE injector which meet standard IEEE802.3af, provides power and data at the same time for the terminal device does not support PoE. ✓USB Type C PoE Splitter 5V 2.4A, POE Voltage: 48-57V, Output: 5V DC power out (5V 2.4A 12watts Max, Plug USB Type C ), 10/100Mbps ethernet data transfer rate.