0.96 Inch OLED Module is a mini display screen with 128X64 resoluction and SSD1315 chipset Standard IIC communication interface pinout and these modules can be controlled by I2C compatible with most MCU development board such as ar duino, Raspberry-Pi,C51 series etc Features: Easy to setup Super Low Power Consumption Power Input: 3.3V Good compatibility: For Raspberry Pi 4B/3B+/3B/2B/Zero, Beagle Bone Black and so on Support I2c IIC communication Protocol Super Mini size Display Specifications: Display Mode: Passive Matrix Display Color: Yellow and Blue Drive Duty: 1/64 Duty Mechanical Specifications: Outline Drawing: According to the annexed outline drawing Number of Pixels: 128 * 64 Panel Size: 24.74 × 16.9 × 1.42 (mm) Active Area: 21.74 × 10.86 (mm) Pixel Pitch: 0.17 × 0.17 (mm) Pixel Size: 0.15 × 0.15 (mm) Weight: TBD Working Temperature: -30°C~70°C Interface: VCC: 3.3 - 5V GND: Ground SCL: Serial Clock SDA: Serial Data What you will get: 4 * 0.96 Inch I2c Display Module Yellow Blue 4 * 4 Pin

Support I2c IIC communication Protocol. Four square holes are easy to install. Changeble IIC Address: The IIC address can be changed,it is convenient to use with different machines. 128 X 64 Pixel: Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable.No embedded fonts inside the OLED controller, user can create the fonts through the font generation software. Application: These serial modules can be used for raspberry Pi 4B/3B+/3B/2B/Zero, Beagle Bone Black,Arduino UNO and Mega, 51 MCU, STIM 32 and so on. Showing graphical & textual information directly on your micro-controller projects.