MAIWO USB3.2 GEN2x2 to M.2 NVMe/AHCI Hard Drive Docking Station/Duplicator with One-Key Offline Clone (20Gbps)

• This dual bay M.2 SSD enclosure supports simultaneous read and write of both NVMe and AHCI SSDs, support M.2 PCIe NVMe/AHCI M-Key and B&M-Key in size 2230/2242/2260/2280. Please note that the TARGET slot supports only M.2 NVMe SSD, the SOURCE slot supports both M.2 NVMe and AHCI SSD.
• Support one-key offline clone function, no need to connect to PC, you can back up your important data with one-key. Please make sure the capacity of target disk is larger or equivalent to that of source disk.
• USB3.2 GEN2x2 Interface, transmission speed up to 20Gbps, read&write data in a second.
• Tool-free, no driver needed, plug and play, and very easy to install, just press and pull out the enclosure.
• Intelligent sleeping mode, if there is no data activity within 3 minutes, it enters sleeping mode automatically, and the led lights will be off, save power and protect hard drive very well.
• With an independent 5V/3A power supply, offers a stable and reliable energy supply and a stable data transfering.
• The shell is made of Aluminum Alloy, very compact and has good head dissipation performance
• Come with two kinds of USB cables: Type-C to Type-C, Type-C to USB3.0, can work with many devices such as Laptop/PC/Smartphone/Smart TV/Smart Router/PS4/PS5 etc.

Clear LED Indicators for different Working Status

- Read&Write Mode: SSD1/SSD2 lights are blue

- Reading&Writing: SSD1/SSD2 lights are blue and flashing

- Clone Mode: Progress lights are flashing by turns

- SSD is defect: The SSD light is read and flashing

If your drive is new, please follow below steps to make the enclosure work:

1. Insert drive and connect the enclosure to PC.
2. Hard Disk Initialization: Computer----Manage---Disk Management---find new disk and initialize (NOTE: Please choose MBR if the capacity of your disk is less than 2TB, choose GPT if larger than 2TB.)
3. Disk Partition and Format: New disk will become “Disk 1” after initialization, right click “Disk 1” and choose “New Simple Volume” to do partition, choose the capacity you need and choose “Formatting”.