MAIWO Dual Bay USB 3.0 to 2.5 inch SATA Hard Drive RAID Enclosure

User Friendly

• Tool-free installation
• Support hot swapping
• Plug and play
• Built-in sponge cushion, stable and shockproof

LED Indicator

• Blue LED lights up when it is connected to power supply.
• Blue LED blinks when read and write.

Additional power is required when using this enclosure, a USB3.0 Type-A to Micro USB power cable will come with this enclosure.

4 RAID Modes

• RAID 0: Merge all HDD's capacity in the HDD enclosure and upgrade it's performance (reading and writting speed).
• RAID 1: Two HDD's in the HDD enclosure can backup each other, cannot upgrade it's performance (reading and writing speed), and it can support self restoration function (RAID 0 modes cannot support this function), which makes files can be restored when mistaks and faults occur.
• LARGE: Merge all HDD's capacity in the HDD enclosure to make it easy to manage but can not upgrade it's performance.
• NORMAL: Means normal state, all HDDs in the HDD enclosure work independently without forming any RAID modes.

Installation Instruction of MAIWO Dual Bay 2.5" SATA HDD/SSD RAID Enclosure

1. Remove the middle frame of enclosure, install 2.5 inch hard disks at 45 degrees to the HDD1/HDD2 separately, fix the hard disks with screws, put the middle frame back into the hard drive enclosure and fix the middle frame with screws.
2. After setting the function mode, connect the enclosure to the PC with data cable, connect the power supply, press and hold the RESET button, turn on the power switch, wait 5-8 seconds, the RAID indicator lights up and let go, then USB driver will be installed automatically to your PC.
3. Note: If you are connecting to a new hard disk, right click on the computer desktop "Computer" - "Management" - "Disk Management" - find the corresponding disk first "Initialize Disk", then "New Simple Volume". See the user manual for details on RAID usage.