iDatalink Maestro HRN-RR-SU2 Plug and Play T-Harness for SU2 Subaru Vehicles 2013+

iDatalink Maestro HRN-RR-SU2 Interface Harness Retain the factory steering wheel audio controls and other factory features with an iDatalink-ready car stereo in select 2012-up Subaru vehicles (ADS-MRR or ADS-MRR2 module also required)

This HRN-RR-SU2 interface harness from iDatalink Maestro allows you to connect a new iDatalink-ready car stereo in select 2012-up Subaru vehicles, working in conjunction with iDatalink's Maestro ADS-MRR or ADS-MRR2 module. Once connected, you'll retain the use of your Subaru's steering wheel audio controls. You'll also keep your Subaru's amp and subwoofer (if present), plus you'll also be able to display engine performance data and other vehicle info on your receiver's screen.

The package includes three connectors that plug in between the Maestro module, your Subaru radio's wiring plugs, and your new car stereo. You'll have to solder or splice together this harness's power/ground, illumination, and speaker output wires to the corresponding wires on your aftermarket receiver's wiring harness. The iDatalink Maestro harness also supplies the outputs you'll need for a navigation receiver.

Subaru Installation Harness: The iDatalink Maestro HRN-RR-SU2 installation harness greatly simplifies the installation of the Maestro RR or RR2 Car Radio Replacement Interface module (sold separately) in select Subaru, Scion, & Toyota vehicles when replacing your factory radio with an iDatalink Serial Port compatible head unit from Kenwood, JVC, Alpine, Sny, or Pioneer.

Product highlights:

• Allows installation of a new iDatalink-ready receiver in select Subaru vehicles
• Also requires the Maestro ADS-MRR or ADS-MRR2 module
• Retains the use of your steering wheel audio controls, plus factory amp and subwoofer
• Displays engine performance data on touchscreen
• Provides outputs for a navigation receiver

Retained Factory Features: The following factory features (if applicable) are retained when replacing your factory radio with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Alpine, Sny, or Pioneer using the Maestro RR or RR2 Car Radio Replacement Interface module and HRN-RR-SU2 installation harness.

• Factory Starlink telematics and SOS buttons (if equipped)
• Factory amplifier with turn-on & fader (if equipped)
• Factory steering wheel controls (SWC) with two-function programmability
• Factory Aux input and backup camera (if equipped)

Extra Features: The following Extra features are added when replacing your aftermarket head unit with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Pioneer, Sny, or Alpine using the Maestro RR or RR2 Car Radio Replacement Interface module and HRN-RR-SU2 installation harness.

• Selectable Performance Gauges
• Read/Reset Check Engine Codes
• Vehicle Info (including Tire Pressure Display, Battery Voltage Display, & Door Open Status/Warning)

Navigation Outputs: The HRN-RR-SU2 provides a VSS (vehicle speed sense), Parking Brake, and a Reverse Light output to make installing your compatible aftermarket navigation radio simpler and less time consuming.