This 5-Port PoE Industrial Ethernet Switch is specially designed for harsh industrial and outdoor environments.

• Such as: Solar Power Energy, Manufacturing, Intelligent Transpotation, Factories, Warehouse, Refineries and Garage Wall, Vehicle, RV Park, Attic, Barn.

Network expansion & Video surveillance & Power over ethernet

Please Note: Work with the standard 48V PoE devices, don't work with 12V PoE devices.

Such as : PoE cameras, wireless access points, access control, printer, router etc. (Standard 48V PoE Output)

The total PoE Output of this industrial ethernet switch is 65W, each port can reach up to 30W.

Support Stanard 48V PoE IEEE 802.3af/at PoE Devices

Suitable for a wide range of devices

Product Specifications

Interface Parameters: 4x 10/100/1000Base-TX PoE port + 1x10/100/1000Mbps UpLink Port • Auto-negotiation of Half-Duplex / Full-Duplex

Standards and Protocols: IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3ab 1000BASE-T • IEEE 802.3x Full duplex and flow control • IEEE 802.3af/at PoE

Temperature and Humidity: Operating Temperature : -40~185°F • Relative Humidity: 5% to 95% non-condensing

Switch Properties: Switching Capacity: 10Gbps • Forwarding Rate: 1.488Mbps • MAC Address Table: 2K • Packet Buffer: 2MB • Jumbo Frame: 9KProtection GradeIP40Installation: DIN-Rail

Delay Time: <3µs

Power Characteristics: Power Input : DC 12~52V • PoE Standard : IEEE 802.3af/at PoE • PoE Power Budget : 30W Per PoE Port • Power Consumption : <4W • Protection : Overload current protection, Reverse polarity protection

MTBF: >50,000Hrs

Cooling Method: No-fan, low power natural cooling

Stability: CE , FCC, RoHS • IEC 60068-2-6 Fc (Vibration) • IEC 60068-2-27 Ea (Shock) • EN 61000-4-4 (Burst Standards) •EN 61000-4-8 (Magnetic Field Standards) • EN 61000-4-5 (Surge Standards): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV

Processing Type: Store and Forward

Dual Redundant Power Inputs: When one of the DC power is fail, the relay will be trigger.

Please Note for installing power wires: When installing power wires, insert the power wires into corresponding polarity signal holes. Insert the Red wire into P1+ or P2+, and the Black wire into P1- or P2-, and tighten them to ensure that the power wires do not fall off when the industrial switch is moved, then plug it into the power outlet.

What's Included:

1 x 5-Port Gigabit PoE Industrial Ethernet Switch

1 x 65W AC Power Adapter

1 x One Meter Power Cable

1 x User Manual