Specification: Using high-precision regulator IC as a reference, the default regulator is 2.5v +- 50mV (adjustable R4 and R5 resistors can adjust the pressure limit size). Each capacitor is equipped with a protective plate, effectively protecting each capacitor from exceeding the limit voltage. The large copper on the back of the power tube and resistor improves heat dissipation performance and makes operation more stable. The diameter is 35mm, the fixed aperture is 5.8mm, the center distance between the two holes is 12.5mm, and the gasket diameter is 10mm. (Based on 600-700F supercapacitors). High power switch, three 2010 SMD resistors connected in parallel to a 0.4 ohm resistor (considering heating issues, the continuous voltage limit should not exceed 1A current).

Suitable for supercapacitor protection board. Capacitors are equipped with protective plates, which can effectively protect each capacitor from exceeding the limited voltage. The large copper on the back of the power tube and resistor improves heat dissipation performance and makes operation more stable. The diameter is 35mm, the fixed aperture is 5.8mm, the center distance between the two holes is 12.5mm, and the gasket diameter is 10mm. (Complies with 600-700F supercapacitors). Packaging: 1 unit, using high-precision regulator IC as a reference, default regulator is 2.5v +- 50mV (adjustable R4 and R5 resistors can adjust pressure limit size).