COMPATIBILITY: This screen replacement ONLY for iPhone 12 and iphone 12 Pro 6.1 inch

Model number on the back cover: iPhone 12: A2172, A2402, A2404 and iPhone 12 Pro: A2341, A2406, A2408, A2407

Not for iPhone 12MiNi,Not for iPhone 12PROMAX, Please make sure you identify your Phone correctly before purchase.

This screen replacement part for iPhone 12/12 PRO does not include the home button, front camera, receiver, and sensor assembly .Please remove these parts from the original iPhone 12/12 PRO screen and install them on the new screen.

Package list:

1*compatible with iPhone 12/12 PRO LCD screen Replacement

1*screen opening pliers

1*installation manual

1* screw mat

1* for iPhone 12/12 PRO Tempered Glass Protector

1*waterproof adhesive sticker

1*repair tools set

The repair tools kit contains pentalobe screwdriver, Y-shaped screwdriver, phillips screwdriver, spudger, triangle, sucker and sim card pin.

For iPhone 12/12 PRO Screen Replacement Kit Repair FAQ

1)Is the screen difficult to install for those who have no repair experience.

1.No, the installation is not difficult.

There are many experts on YouTube to share the installation video,You could watch their videos repeatedly then follow their videos for repair, It usually takes only 20-30 minutes.

2) What can I do to retain the Face ID of my phone?

2.Face ID only works with the original front camera and sensors assembly for user protection, you have to install the original iPhone12/12 PRO LCD digitizer screen components on our screen correctly.

If the Face ID doesn’t work after using the screen installation, please make sure all the parts are put in the correct places, and reset the Face ID on your 12/12 PRO setting then do a hard reset.

3)There are black/white dots or lines on the lcd screen 12/12 PRO 6.1" screen, what should I do?

3.This may be caused during transportation, incorrect installation, or incorrect usage of the screen, please do not press too hard on the screen or drop it during installation or daily use.

4) Why does the touch function can't work properly after connecting all the cables?

4.The touch issue might be caused because the cables are not installed correctly.Please try to unplug all the connectors on the logic board.Then use Alcohol Cotton or cotton swabs to wipe all the sockets carefully and reinstall the screen.Make sure you connect all the connectors correctly with a "click" sound and make sure the metal plate over the connectors of the LCD digitizer for 12/12 PRO is screwed down properly.