COMPATIBILITY: only 6.5-inch For iPhone 11 Pro Max screen replacement ! Models: A2161, A2220, A2218 A2161, A2220, A2218, does not apply to iPhone 11, does not apply to iPhone 11PRO.

This screen replacement parts for iPhone 11 Pro Max do not include the home button, front camera, receiver, and sensor assembly.

Please remove these parts from the original iPhone 11 Pro Max screen and install them .

The front-facing camera is easily damaged during removal, so please proceed with caution.

For the iPhone 11 Pro Max Screen Repair Kit, everything you need is included in this kit:

1 * Compatible with iPhone 11 Pro Max LCD screen replacement

1 * Installation manual

1 * Screw pads

1 * Tempered glass

1* Waterproof Bezel Sticker

1* Repair Tool Kit

The Repair Tool Kit contains a pentagonal screwdriver, Y-driver, Phillips screwdriver, screwdriver, screwdriver, triangle, suction cups, and sim card pins

For iPhone 11 Pro Max Screen Kit Repair FAQ

1)Is the screen difficult to install for those who have no repair experience?

1.No, the installation is not difficult

There are many experts on YouTube to share the installation video,You could watch their videos repeatedly then follow their videos for repair, It usually takes only 20-30 minutes.

2) What can I do to retain the Face ID of my phone?

2.Face ID only works with the original front camera and sensors assembly for user protection, you have to install the original iPhone 11 Pro Max digitizer screen components on our screen correctly.

If the Face ID doesn’t work after using the screen installation, please make sure all the parts are put in the correct places, and reset the Face ID on your iPhone 11 Pro Max setting then do a hard reset

3)There are black/white dots or lines on the LCD iPhone 11 Pro Max 6.5"screen, what should I do?

3.This may be caused during transportation, incorrect installation, or incorrect usage of the screen, please do not press too hard on the screen or drop it during installation or daily use.

4) Why does the touch function can't work properly after connecting all the cables?

4.The touch issue might be caused because the cables are not installed correctly.Please try to unplug all the connectors on the logic board.Then use Alcohol Cotton or cotton swabs to wipe all the sockets carefully and reinstall the screen.Make sure you connect all the connectors correctly with a "click" sound and make sure the metal plate over the connectors of the LCD digitizer for iPhone 11 Pro Max is screwed down properly.