Q:How to connect with the backup camera? Why there is no image while reversing? Note: we have a detail picture if you need it.
A:1.Please cut the pink wire's insulation layer and connect to the pink line on little yellow's head (which extending from the video input cable)
2. The black wire of the small yellow head extension cable is connected to the backup light "-" and red cable connect together to the backup light "+".
Q: How to connect with our original camera? Note: we have a detail video if you need it. (Please note that the connection is different to the one connect with the backup camera.)
A:1. Connecting the camera power cable 2. Connect the camera video cable 3. Connect the red wire of the video cable to the red wire of the power cable. 4.Video cable connect to the reversing cable 5. plug the reverse cable into the head unit port 6. Cut and interface and connect the two wire (Thired from the black line, don't cut it off) 7. The red cable of the video cable is connected to the BACK video in wire of the head unit power cable (Thired from the black line, don't cut it off ) 8. plug the power cable into the head unit 9. The red wire connects to the positive terminal of the reversing light, black wire to the negative terminal of the reversing light. (Please remember to change the correct system, step: Enter Car settings -- Factory (PIN 1617/3368) --Backcar Setting -- select the correct system one by one for HD reversing system)
Q: Why there is no GPS signal?
A:1.Please confirm whether you're in a area where GPS signal is shielded. Please drive fir a while to see if the GPS signal is restored.
Q: How to change UI? A:Enter setting -General- Home Launcher selection
Q: Why the SWC control can't work well?
A: Step: Click APP- Carsetting-System Setting-Factory Setting-PIN 1617/3368. At last, please choose the Canbus type; CAN Box type-XP Car Brand- Jeep Car Model-All CAN Box - XP.HIGH.AMP. And then please open your car door to check if your car radio will diaplay the car door has opened. If the swc control still can't work, please click the 'SWC learning'' to learn the button (There are guidelines to follow and learn).
