This strong adhesive phone holder is designed to solve the need for mounting phones on walls in specific situations. The product consists of three main parts: a base adhesive pad with a 1/4 inch screw, a dual-ball head mount, and a phone clamp. The clamp, equipped with an internal spring, can accommodate phones ranging from 6 to 8.5 cm (suitable for 4 to 6.7-inch phones). Once the clamp secures the phone onto the ball head mount, it allows for rotation. Additionally, the mount's angle can be adjusted for convenient use. Suitable surfaces for the strong adhesive include frosted glass, marble, painted wood, ceramic tiles, smooth metal plates, smooth glass, and other solid, flat surfaces. Surfaces not suitable for the adhesive include peeling walls, wallpaper, plaster walls, and other uneven or powdery surfaces. Ensure the base is dry and dust-free before attaching it, squeeze out any air bubbles after attachment, and wait a day for a tighter and more stable bond. The entire holder is approximately 10 cm in length, not very long. It is recommended for fixed use as the base is adhesive and has a super strong sticking force, making it difficult to move. If it must be removed, it can only be done so destructively with tools like pliers, and the adhesive pad can be purchased separately. Ideal for fixed phone holding scenarios in the kitchen, bathroom, bedroom, beside the bed, on countertops, etc., providing stability and an aesthetically pleg look. See more

5.Simple installation process without any tools: Clean and dry the surface for attachment.Remove the film of the base,Stick the base to the chosen surface and squeeze out air bubbles.Screw the stand onto the base screw, Unscrew the nut of the clip, insert the ball head, stuck the clip onto the ball head, and tighten the nut to secure the clip onto the ball head.(Tip: wait for one day,the base will become more tighter). 4.Multifunctional use:Firstly, both ball heads can be adjusted, the ball head clamp can rotate 360 degrees, and the bottom ball head fixed base can also adjust the extension angle through elastic screws to meet the needs of different angles. In addition, when using it as a phone stand, you can also use it as a hook. After fixation, you can hang easily hanging items such as cleaning cloths, which can help you free your hands and keep your desk clean and tidy. 3.Broad Compatibility:We use a wide edge and large clamping force mobile phone clip, which is widened on both sides for easy stretching. The large clamping force can also clamp the phone to avoid falling off.The clamp, equipped with an internal spring, can accommodate phones ranging from 6 to 8.5 cm (suitable for 4 to 6.7-inch phones). 2.Innovative Dual Ball Head: Dual balls are adjustable ,Allows 360-degree rotation, flexible adjustment of phone angles to meet different viewing needs.The metal ball head is very smooth and easy to adjust the angle. It is equipped with a metal base and a 1/4 inch female head, which fits perfectly with the base mounting screw.The entire bracket is about 10cm long, not too long, making it easy to use. 1.Strong Adhesive Design: Uses high-viscosity adhesive pads, Suitable surfaces for the strong adhesive include: frosted glass, marble, painted wood, ceramic tiles, smooth metal plates, smooth glass, and other solid, flat surfaces. Not suitable for the adhesive include:peeling walls, wallpaper, plaster walls, and other uneven or powdery surfaces.