The fastest one-handed mobile phone holder on the planet for motorcycles. Supports cell phone up to a thickness of 15 mm. Inclined shape that makes it easier to press the center button. Wide adjuster for vertically long smartphones. Incorporating a Japanese made spring made by Nippon Seisen Co., Ltd., a long-term stable spring rate creates further operability. ¦ qi wireless charging output: 15W / 10W / 7.5W / 5W ¦ USB output: Up to 18W (12V1.5A / 9V2A / 5V3A) QC3.0 Supports Quick charging. ¦ Vehicle 12V input: QI and USB can be used at the same time. ¦ USB input: QI can be used with a USB power supply such as a mobile battery. (USB power supply type C not supported) ¦ Waterproof: IP66 ¦ Power switch: ON / OFF . Can be used directly with the battery.¦ Wiring: 1.75m inconspicuous black wire, with fuse holder, Giboshi terminal ? conversion terminal. ¦ Holder size: Vertical width 5.2-6.7in, Width 2.4-3.1in, Thickness 0.6 in, Aspect ratio 1: 2 (width adjustment range -0.4 in) ¦ Material: Aluminum + Stainless + Polycarbonate + ABS ¦ Set Contents: phonr Holder, aluminum bar mount (0.67in ball / 1.25 in), mirror mount (0.4 in / thickness 0.28 in / 7/8 in ), diameter conversion attachment (1/2 / 7/8 / 1 in), SAE harness, conversion terminal, rubber tape, fuse, hexagon wrench, fuse, tie wrap, safety band, ¦ Brand: Kaedear [Compatible reference models] iPhone 13 Pro Max / 13 Pro / 13 / iPhone 12 Pro Max / 12 Pro / 12 / iPhone 11 Pro Max / 11 Pro / 11 / XS Max / XR / X / 8 Plus / 8/7 Plus / 7 / SE / SAMSUNG Galaxy S9 / S9 Plus / Note 8 / S8 / S8 Plus / Sony / Huawei / Google Pixel etc. 4.7-6.9 inches (Please check the size of the phone case.) Not supported: QI position is not in the center Phone model[Compatible reference models] iPhone 13 Pro Max / 13 Pro / 13 / iPhone 12 Pro Max / 12 Pro / 12 / iPhone 11 Pro Max / 11 Pro / 11 / XS Max / XR / X / 8 Plus / 8/7 Plus / 7 / SE / SAMSUNG Galaxy S9 / S9 Plus / Note 8 / S8 / S8 Plus / Sony / Huawei / Google Pixel etc. 4.7-6.9 inches (Please check the size of the phone case.) Not supported: QI position is not in the center Phone model. ¦ Holder size: Vertical width 5.2-6.7in, Width 2.4-3.1in, Thickness 0.6 in, Aspect ratio 1: 2 (width adjustment range -0.4 in) ¦ Material: Aluminum + Stainless + Polycarbonate + ABS ¦ Set Contents: phonr Holder, aluminum bar mount (0.67in ball / 1.25 in), mirror mount (0.4 in / thickness 0.28 in / 7/8 in ), diameter conversion attachment (1/2 / 7/8 / 1 in), SAE harness, conversion terminal, rubber tape, fuse, hexagon wrench, fuse, tie wrap, safety band, ¦ Brand: Kaedear. ¦ qi wireless charging output: 15W / 10W / 7.5W / 5W ¦ USB output: Up to 18W (12V1.5A / 9V2A / 5V3A) QC3.0 Supports Quick charging. ¦ Vehicle 12V input: QI and USB can be used at the same time. ¦ USB input: QI can be used with a USB power supply such as a mobile battery. (USB power supply type C not supported) ¦ Waterproof: IP66 ¦ Power switch: ON / OFF . Can be used directly with the battery.¦ Wiring: 1.75m inconspicuous black wire, with fuse holder, Giboshi terminal ? conversion terminal. The fastest one-handed mobile phone holder on the planet for motorcycles. Supports cell phone up to a thickness of 15 mm. Inclined shape that makes it easier to press the center button. Wide adjuster for vertically long smartphones. Incorporating a Japanese made spring made by Nippon Seisen Co., Ltd., a long-term stable spring rate creates further operability. We wanted to try such a product that we are particular about to everyone in the United States that we long for, so we landed on . A major American company told me that Kaedear products should be sold in the United States. So we are here. Do you know Kawasaki Ninja ? Ninjas should have shuriken . We hope you enjoy the Japanese motorcycle culture. hello. This is Kaedear Co., Ltd. We are a manufacturer of motorcycle accessories and accessories in Yokohama, Japan . Do you like Japanese motorcycles ? We have developed original designs and functional accessories for Japanese rider s , and we are proud of the top share in Japan such as phone holder .
