How To Use 1. Place the warmer on a stable and heatproof table. 2. Unpack the facial wax and smash them into small pieces to fill into the warmer 3. Connect the machine into the power. Set the temperature to either 170F. About 25 to 40 minutes later(According to the melting point and weight of the wax), the wax(no include) is totally melted. 4. After the wax has melted, turn off the machine and put the heat insulating grid into the machine. 5. Check for suitable temperature before using the wax 6. Use the brush/silicone spatula to spread an even layer of wax onto your hands/the area youre going to wax and wait for the wax to dry 7. After the wax has dried, slowly dip your hands into the melted wax, with your fingers outstretched 8. Leave your hands in for 20-30 seconds 9. Relate steps 9 and 10 at least 4-5 times until it forms a thick layer on your skin 10. To help achieve a better effect, wrap your hands with the glove liner and put on a pair of heat-preservation cotton gloves 11. After 10-20 minutes, take off the gloves and get rid of the liner 12. Remove the hardened wax from your hands Specification Color: White Purpose: Paraffin wax heating Capacity: 2000 ml Temperature range: 60 -70 degree Function: Paraffin Wax Meltdown Package List 1 x 2000ml Paraffin Wax Machine 8 x 200 g Paraffin Wax 100 x Glove Liners for hand 100 x Glove Liners for feet 2 x Thermal Mitts for hand 2 x Thermal Mitts for feet 1 x Heat Insulating Grid 1 x Silicone Spatula 1 x Brush 1 x User Manual LED INDICATOR LIGHT *Continue emit green-- Heating up *LED light off--No power or Reach the set temperature Tip: When the temperature reaches your setting, the LED lights will go out. When the temperature drops to a certain level, the LED lights will turn on again and heat up.