Product parameters: On-board 2.4G PCB antenna, ISM band, 2.54mm in-line type, compact size, convenient for embedded applications Support six-channel data reception (one-to-six) Support GFSK/FSK and other general modulation modes Support 2Mbps/1Mbps/250Kbps data rate, and set different transmit power Multi-frequency point: 126 frequency points, meeting the needs of multi-point communication and frequency-hopping communication, 2400MHz~2525MHz, 1MHz frequency-hopping step The average emission current is as low as 11.3mA (0dBm) Receiving sensitivity: -85dBm@1000kbps Transmitting power can be up to 0dBm Four-wire SPI interface is adopted, and the speed can reach 10MHz, Hardware interrupt output of receiving and sending data Support 1 bit RSSI output Working temperature: -20 ?~60 ? The best transmission distance: at the rate of 1 MBPS in the open area, the test distance of transmitting and receiving 10 bytes of data is about 70 meters at most Electrical Characteristics Supply voltage: 1.9V-3.6 V Current Consumption Sleep mode: 0.9uA Standby mode: 32uA Rx states: 11.8mA @1MBPS Tx states: 11.3mA @0dBm/7mA @-18dBm Transmitter Part Tx data rate: 1000Kbps-2000Kbps(Typ1000Kbps) Frequency range: 2400MHz-2483.5MHz Output power: -18dBm-4dBm(Typ0dBm) Receiver Part Receiver sensitivity: -85dBm @1000Kbps Saturation: -23dBm Adjacent channel rejection: 21dB (Desired channel 3dB above the sensitivity limit. 1MHz channel specing) Alternate channel rejection: 30dB (Desired channel 3dB above thesensitivity limit. 1MHz channel specing)

On-board 2.4G PCB antenna, ISM band, 2.54mm in-line type, compact size, convenient for embedded applications. The best transmission distance: at the rate of 1 MBPS in the open area, the test distance of transmitting and receiving 10 bytes of data is about 70 meters at most. The module size is 32 * 15.2mm, 2.54mm spacing double-row pin interface. XL24L01-D01 integrates all high-speed signal processing parts related to RF protocol, such as the automatic retransmission of lost data packets and the automatic generation of response signals. The SPI interface of the module can be connected by using the hardware SPI port of the single-chip computer or simulated by using the I/0 port of the single-chip computer. XL24LD01 is a high-performance 2.4G wireless transceiver module designed with nrf24L01 2.4G wireless transceiver IC, GFSK modulation, operating in the international common ISM frequency band of 2400-2483M, with a maximum modulation rate of 2MBPS.