Category: PET silver paste printing circuit Circuit level: 35V (DC), 100mA, 1W Standard square resistance: = 50O Contact resistance: 10-200O (varies with lead length and material) Insulation impedance: 100MO 100V Dielectric withstand voltage: 250VRms (50-60Hzc.1min) Contact jitter time: = 5ms Lead wire bending: The curvature radius is 2m, and after repeated bending at ± 90 degrees for 50 times, the lead wire strip has no cracks or peeling phenomenon Operating pressure: 350g±15% Switch stroke: 0.3-0.5mm Contact impedance: = 1O Rated voltage: 2~24V Contact current: 5-10mA Service life: about 500000 times Maximum mechanical load capacity: Apply 150N-250N operating force to the center of the button, and 60 times the button is still in good condition Line thickness: 0.13MM

Package including: 3Pcs 1x5 5 Key Membrane Switch. Switch stroke: 0.3-0.5mm, Contact impedance: = 1O, Rated voltage: 2~24V, Contact current: 5-10mA, Service life: about 500000 times. Contact jitter time: = 5ms, Lead wire bending: The curvature radius is 2m, and after repeated bending at ± 90 degrees for 50 times, the lead wire strip has no cracks or peeling phenomenon, Operating pressure: 350g±15%. Contact resistance: 10-200O (varies with lead length and material), Insulation impedance: 100MO 100V, Dielectric withstand voltage: 250VRms (50-60Hzc.1min). Category: PET silver paste printing circuit, Circuit level: 35V (DC), 100mA, 1W, Standard square resistance: = 50O.