iZEEKER 11.5ft Type-C USB Hardwire Kit Fuse for Dash Cam Widely Compatible with 11.5V-40V Car Dashcam Charger Pord

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

iZEEKER 11.5ft Type-C USB Hardwire Kit Fuse for Dash Cam Widely Compatible with 11.5V-40V Car Dashcam Charger Pord

Regular Price: US$41.99

Special Price US$34.99

Availability: In stock

Supplier: iZEEKER

Category: Automotive Car & Vehicle Electronics Car Electronics Car Video On-Dash Cameras

Qty:

iZEEKER USB Type-C Hardwire Kit PIHK03

It's a must-have if you need a 24/7 parking guard with your dash cam. It connects the camera directly to the OBD-II connector of your car under the dash cam for continuous power from the vehicle’s battery. When the car is driving, it can be used to replace the ordinary car charger, and the car ignition will not be powered off. iZEEKER Hardwire Kit is specialized for iZEEKER Dash Cam GD300/GD800/GD850/iD400 or other USB Type-C charging port car recorder.

Specifications:

Connector: USB Type-C
Input Voltage Range: 11.5V-40V
Output: 5V /1.5A
Working Temperature:-10-60?
Cable Length: 3.5M
Low Voltage Protection: When voltage lower than 11.5, automatically cut off the power

Installation Instruction:

Mount your camera where it has full vision of your road
Run the wiring towards to the OBD-II connector of your car
Hide the wire under the headboard
Remove the 3M Sticker of the G-sensor on hardwire kit, then firm to the windshield where close to dash cam.
Connect the hardwire kit with the dash cam and power the camera for using.

Warm Tips:

If you don't have experience installing the hardwire kits for the dash cam, please ask the iZEEKER Customer Team for professional help, we are always here to serve you.

Low Voltage Protection - With a smart low voltage protection system, the camera will power off automatically when the battery voltage is lower than 11.5V, thus preventing it draining the battery. 24 Hours Parking Surveillance - The hard-wire kit connected to the OBD-II connector of your car, can uninterruptedly supply power for the dash camera for 24 hours. It can even supply Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot. Build-in G-SENSOR - The dash cam automatically shuts down 5 minutes after the car is turned off. At this time, the G-SENSOR in the OBD starts to work (in the monitoring state). Once the car is vibrated, the OBD will be powered on to turn on the recorder. When there is no vibration signal, the driving recorder will automatically shut down after 1 minute, which will save the battery. Compatible 11.5-40V Vehicles - This Hardwire Kit connects the camera directly to the car, truck, bus, SUVs, or big rig for continuous power, with a wide range of input voltage(Voltage between 11.5-40V), suitable for most in-car USB Type-C devices on the market. Fits for iZEEKER GD300/GD850/GD800/iD400 - With USB Type-C charging port converters, the kit is basically fit for USB Type-C port Dash Cams or Car Charger like GD300/GD850/GD800/iD400.