Features
MyFord Touch OEM Integration Dash Kit & Vehicle Harness: The iDatalink Maestro KIT-MFT1 consists of a dash kit, vehicle harness, and adapters designed specifically for select 2011-up Ford Edge, Expedition, Explorer, F-Series, Flex, Fusion, Mustang, Taurus model vehicles equipped with Ford's MyFord Touch factory radio. In combination with the iDatalink Maestro RR or RR2 Car Radio Replacement Interface module (sold separately), the KIT-MFT1 lets you replace your compatible Ford vehicle's MyFord Touch radio with an aftermarket Alpine, JVC, Kenwood, Sny, or Pioneer receiver equipped with the iDatalink Serial Port.
Head Unit Connection: The KIT-MFT1 supports iDatalink's Direct T-Harnesses (sold separately) for direct connection to select iDatalink Serial Port compatible head units (including Kenwood, JVC, Alpine, Sny, and Pioneer radios) - replacing the wiring harness that comes with your aftermarket stereo (some hardwiring may still be required). If connecting to an aftermarket head unit that does not support an iDatalink Direct T-Harness, you'll need to cut off and remove the 20-pin black connector from the KIT-MFT1's harness and splice each wire directly to the aftermarket radio's corresponding wire.
Dash Kit: The iDatalink Maestro KIT-MFT1 includes a black ABS trim-panel and four sturdy metal brackets to mount a compatible double-DIN Alpine, JVC, Kenwood, Sny, or Pioneer receiver equipped with the iDatalink Serial Port.
Retained Factory Features: The following factory features (if applicable) are retained when replacing your factory radio with a compatible iDatalink Serial Port head unit from Alpine, JVC, Kenwood, Sny, or Pioneer using the Maestro RR or RR2 Car Radio Replacement Interface module and the KIT-MFT1 installation package.
- Factory Amplifier: Retains premium Sny factory amplifier with turn-on. However, fader control will be lost.
- Climate Display & Control: The factory climate display and control can be accessed from the touchscreen of your compatible iDatalink aftermarket head unit.
- Vehicle Settings: Access and modify factory vehicle settings through the compatible aftermarket head unit's touchscreen.
- Secondary Vehicle Display: Secondary vehicle display is retained (if factory equipped) with audio information, hands-free information, and internal navigation.
- Steering Wheel Controls: Factory steering wheel controls are retained with two function buttons and expandable radio functions.
- Advanced Camera Features: Factory backup camera is retained with parking guidelines, as well the factory 360 camera. If you add an aftermarket front and/or side cameras (sold separately) to your Idatalink compatible head unit that is equipped with multiple camera inputs, the vehicle's factory auto camera switching feature is also retained.
- Warning Chimes: Factory warning chimes are retained through the use of the KITMFT1 installation kit.
USB Module: The KIT-MFT1 comes with a media module that consists of two USB ports; one USB-A port and one USB-C port. The USB module replaces the factory media module and installs in the dash to provide easy access to your compatible iDatalink receiver's rear-panel USB-A and/or USB-C port. The media module features one 6' USB-A extension cable and one 6' USB-C extension cable that will plug into the corresponding port on the back of your iDatalink compatible receiver.
Note: As long as your new aftermarket receiver has a high-amperage charging port (1.5A or greater), the USB module should support Apple CarPlay and Android Auto operation. However, the number of variables involved means we can't assure compatibility.