Idatalink Maestro HRN-HRR-NI1 Plug and Play Radio Replacement Harness for Select 2007-2020 Nissan Vehicles

Idatalink Maestro HRN-HRR-NI1 Plug and Play Radio Replacement Harness for Select 2007-2020 Nissan Vehicles (ADS-MRR or ADS-MRR2 module also required)

iDatalink HRN-HRR-NI1

Connect an iDatalink-compatible car stereo and retain steering wheel controls and factory amp in select 2008-21 Nissan vehicles (ADS-MRR or ADS-MRR2 module also required).

iDatalink meets Nissan

iDatalink's iDatalink HRN-HRR-NI1 installation harness simplifies the installation of the Maestro ADS-MRR or ADS-MRR2 Car Radio Replacement Interface module (sold separately) in select Nissan vehicles when replacing your factory radio.

The package includes connectors that plug in between the Maestro module, your factory radio's wiring plugs, and the serial port on your new car stereo. This harness features an in-line head-unit connector harness, which will plug into their new "Head-unit direct" harnesses for select radio brands. If you're installing a radio that doesn't work with a "Head-unit direct" harness, you simply cut off the plug and connect the wires to the harness included with your new radio.

Retain factory features.

The HRN-HRR-NI1 harness and interface module retains the following features with any aftermarket radio:

• Steering wheel controls
• Use of the factory amplifier, including balance and fade control
• Rear-view camera, depending upon aftermarket radio inputs

The harness also supplies the outputs (parking brake, reverse, and VSS [Vehicle Speed Sense]) necessary for installation of a navigation receiver, plus illumination and accessory power outputs.

If you're buying a compatible iDatalink-ready car stereo, you'll also retain your backup camera's parking lines (requires composite video rearview camera input), as well as the front, side, and 360 camera (requires second composite video camera input). You'll also be able to display gauges and vehicle info on your receiver's screen, plus read and reset engine codes.

Installation Note: This HRN-HRR Plug & Play Harness requires an Idatalink Maestro Interface Module (ADS-MRR or ADS-MRR2) and the corresponding Idatalink Maestro Car Stereo Head-Unit ACC-HU-ALP1 (Alpine), ACC-HU-PIO1 (Pioneer), ACC-HU-SON1 (S O N Y), ACC-HU-KEN1 (Kenwood/JVC with 22-Pin Connector) or ACC-HU-KEN2 (Kenwood/JVC with 16-Pin Connector) Installation T-Harness. Sold separately.

Product highlights:

• Allows installation of a new receiver with iDatalink port in select Nissan vehicles (also requires the Maestro ADS-MRR or ADS-MRR2 module)
• Retains the use of your steering wheel audio controls and factory amp
• Retains rear-view camera, depending upon aftermarket radio inputs (iDatalink-ready car stereos also retain front, side, and 360 cameras)
• Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood, Sny, and Pioneer receivers

Features

Nissan Harness: The iDatalink Maestro HRN-HRR-NI1 installation harness greatly simplifies the installation of the Maestro RR or RR2 Car Radio Replacement Interface module (sold separately) in select Nissan vehicles when replacing your factory radio with an iDatalink Serial Port compatible head unit from Kenwood, JVC, Alpine, Sny, and Pioneer; or other aftermarket headunit.

Head Unit Connection: The HRN-HRR-NI1 supports iDatalink's Direct T-Harnesses (sold separately) for direct connection to select iDatalink Serial Port compatible head units (including Kenwood, JVC, Alpine, Sny, and Pioneer radios) - replacing the wiring harness that comes with your aftermarket stereo (some hardwiring may still be required). If connecting to an aftermarket head unit that does not support an iDatalink Direct T-Harness, you'll need to cut off and remove the 20-pin black connector from the HRN-HRR-NI1 harness and splice each wire directly to the aftermarket radio's corresponding wire.

Retained Features: The following factory features (if applicable) are retained using the Maestro RR or RR2 Car Radio Replacement Interface module and HRN-HRR-NI1 installation harness.

Installation Note: This HRN-HRR Plug & Play Harness requires an Idatalink Maestro Interface Module (ADS-MRR or ADS-MRR2) and the corresponding Idatalink Maestro Car Stereo Head-Unit ACC-HU-ALP1 (Alpine), ACC-HU-PIO1 (Pioneer), ACC-HU-SON1 (S O N Y), ACC-HU-KEN1 (Kenwood/JVC with 22-Pin Connector) or ACC-HU-KEN2 (Kenwood/JVC with 16-Pin Connector) Installation T-Harness. Sold separately.

Flashing Module via Weblink Desktop: The iDatalink Maestro RR or RR2 will need to be loaded with correct firmware before installation. The included USB cable plugs into your computer and allows you to "flash" the Maestro RR with the appropriate firmware to prepare it for installation. Simply download Weblink Desktop (for Windows and Mac) onto your computer to access the appropriate firmware. System requirements include -

• Windows PC (10/8.1/8/7/Vista/XP/2000) or Mac OS X (Mojave [10.14], HighSierra [10.13], Sierra [10.12], El-Capitan [10.11])
• Available USB port (version 2.0 or 3.0)
• 4GB RAM or more / 200MB available space on HDD
• Internet connection

Factory Amplifier: Retains factory amplifier with balance and fade control.

Steering Wheel Controls: Factory steering wheel controls are retained with two function buttons and expandable radio functions.

Advanced Camera Features: Factory backup camera is retained with dynamic parking guideline, as well as the factory Lane Assist and 360 cameras. If you add an aftermarket front and/or side cameras (sold separately) to your aftermarket head unit that is equipped with multiple camera inputs, the vehicle's factory auto camera switching feature is also retained.

Extra Features: The following Extra features are added when replacing your aftermarket head unit with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Pioneer, Sny, or Alpine using the Maestro RR or RR2 Car Radio Replacement Interface module and HRN-HRR-NI1 installation harness.

Vehicle Info: Tire Pressure Display, Battery Voltage Display, Read/Reset Engine Codes, and Door Open Status with Warning.

Gauges: Selectable Performance Gauges.

Outputs: The HRN-HRR-NI1 provides Navigation, Accessory Power, and Illumination Outputs to make installation simpler.

Navigation: Parking Brake, Reverse Light, and VSS (Vehicle Speed Sense).

Accessory Power Output: 12V/15A Accessory Power Output

Illumination Output: Illumination Output

Installation Note: This HRN-HRR Plug & Play Harness requires an Idatalink Maestro Interface Module (ADS-MRR or ADS-MRR2) and the corresponding Idatalink Maestro Car Stereo Head-Unit ACC-HU-ALP1 (Alpine), ACC-HU-PIO1 (Pioneer), ACC-HU-SON1 (S O N Y), ACC-HU-KEN1 (Kenwood/JVC with 22-Pin Connector) or ACC-HU-KEN2 (Kenwood/JVC with 16-Pin Connector) Installation T-Harness. Sold separately.