Idatalink Maestro ACC-HU-SON1 Installation T-Harness for Select Car Radios - Connect select S O N Y radios to compatible iDatalink HRN-HRR T-Harnesses

Idatalink Maestro ACC-HU-SON1 Installation T-Harness for Select Car Radios - Connect select S O N Y radios to compatible iDatalink T-harnesses.

The iDatalink ACC-HU-SON1 adapter allows you to connect select Sony radios to compatible iDatalink T-harnesses. This extra harness takes the place of the harness that comes with your new Sony stereo. It connects directly between select Sony radios and the latest Maestro "Head-unit ready" T-harnesses so you won't have to splice any wires.

Note: This harness will not work by itself. You Must Also Have an Idatalink Maestro Interface Module (ADS-MRR or ADS-MRR2) and a Compatible Vehicle-Specific Idatalink Maestro "HRN-HRR" T-Harness. (It MUST be the HRN-HRR version, NOT the HRN-RR one.)

• Connects to select Sony head units
• Also requires an iDatalink Maestro RR or RR2 module and compatible iDatalink vehicle-specific T-harness

iDatalink Maestro to Head Unit Adapter:

The iDatalink ACC-HU-SON1 adapter harness allows for direct connection between select Sony aftermarket radios and compatible iDatalink Maestro vehicle specific harnesses used with the iDatalink Maestro ADS-MRR or ADS-MRR2 radio replacement interface module. The ACC-HU-SON1 adapter harness will replace the wiring harness that comes with your Sony radio. There is a 16-pin Sony connector one end that plugs into the back of your Sony radio and a 20-pin iDatalink Maestro connector on the other end that will plug into a compatible iDatalink Maestro vehicle specific harness. The 16-pin Sony connector features the following wiring pinout.

Note: This harness will not work by itself. You Must Also Have an Idatalink Maestro Interface Module (ADS-MRR or ADS-MRR2) and a Compatible Vehicle-Specific Idatalink Maestro "HRN-HRR" T-Harness. (It MUST be the HRN-HRR version, NOT the HRN-RR one.)

Note: This harness will not work by itself. You Must Also Have an Idatalink Maestro Interface Module (ADS-MRR or ADS-MRR2) and a Compatible Vehicle-Specific Idatalink Maestro "HRN-HRR" T-Harness. (It MUST be the HRN-HRR version, NOT the HRN-RR one.)