Compatible with: MA-INJ-4-US Meraki Access Points - MR12, MR16, MR18, MR24, MR26, MR32, MR33 MR34, MR62, MR66 & MR72. The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power. The iCreatin PoE Injector can easily connect any IEEE 802.3af/at-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af/at powered device to a LAN switch. Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. Specifications 2 Gigabit Ethernet ports Up to 50W Rated power, Supplies PoE (15.4W) or PoE+ (30W) Power, support both IEEE802.3af and 802.3at Power feed: Support both Mode A and Mode B; Data rate: 10\100\1000Mbps. Deliver power up to about 328 feet(100 meters) Support 100-240V voltage input What in Box? 1 x Gigabit PoE+ injector 1 x US power cord" See more

Compatible with Netgear Access Points (PEA0001-100NAS), Netgear WAC510 and WAC505 access points, Aironet AP and other Gigabit PoE Devices. Built-in Intelligent Detection Chip, Compatible with Standard IEEE 802.3at (IEEE 802.3af backwards-compatible). Integrated Power supply for All-in-One Design (uses standard included grounded AC cord). Replacement for TRENDnet TPE-115GI, Cisco AIR-PWRINJ6=, SB-PWR-INJ2-NA, Comtrend PoE-9211, Axis T8133, T8123-E, 5026-204, T8120, MicroSemi PowerDsine 3501G (PD-3501G/AC),PD-9001GR,PD-9001GR/SP. Up to Max 50Watt Power Budget of power over ethernet, Full Compatible with 802.3af PoE (15.4W) or 802.3at PoE+ (30W) ,.