Use PoE injector with PD to expand your network to where there are no power lines or outlets,where you wish to fix devices such as AP ,IP camera or IP Phone etc. This PoE injector is a single port Gigabit PoE injector offer a compact and cost effective,it can convert standard 100-240V ac power into low-voltage.DC that runs over existing LAN cable to power up IEEE 802.3af/at compliant network accessories. Remote powering of wireless LAN(WAN) access points,IP security cameras,VoIP telephone and other low port density installations. Features: Up to 15.4W/30W of Power on 2-pairs for IEEE802.3at and IEEE802.3af POE Devices Supports 10/100/1000 Base-T applications Led indicators power input and PoE output Internal AC/DC converter no need for external power brick Easy plug and play installation Muti-protection, Specification: Pass Through Data Rates: 10/100/1000Mbps Output Power Voltage: 54~55VDC PoE Port Power: 30W max AC Input Voltage: 100-240VAC Ac Input Current: 0.5A 100-240VAC AC Frequency: 50 to 60 HZ Dimensions: 85x42x30 mm & 3.3x1.65x1.18 in System Indicator: AC power Connectors: shielded RJ-45,EIA 568A and 568B Operating Ambient Temperature: -0 to 40 ℃ Storage Temperature: -40 to 60 ℃ Installation Steps: 1.Use a CAT5 UTP cable to connect port of Ethernet devices to the LAN port 2.Connect AC cable with Injector and Socket 3.Connect the PoE OUT port to a PD with CAT5 UTP cable See more

Compatible with TL-POE160S TL-POE150S and most Gigabit 802.3af IP camera, IP Phone, Wireless IP point and other PoE devices. Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios.Whether you want to use it with an IP camera in your home or work place, a VoIP phone used in a conference room, or use it to provide power and network to a wireless AP, this item is very suitable as long as your device is 802.3af /at standard 48V PoE. Compact and cost effective PoE+ injector which offer multiple protection, such as over current protection, over load protection, over voltage protection and anti-interference protection.IEEE 802.3af compliant. Auto sensing technology delivers Up to 30W of power over ethernet, Supplies PoE (15.4W) or PoE+ (30W) Power. Converts a non-PoE Gigabit port to a PoE Gigabit port and network a PoE device located up to 100 meters (328 ft.) Away. If you have a PoE (802.3af) standard device, and need to use PoE technology to provide it with both network and power.