The AS HHGPS is a handheld GPS connection kit that connects your handheld GPS receiver to your fishing system control head via an additional NMEA data cable (data cable must be purchased from your Handheld GPS Receiver manufacturer). FROM THE MANUFACTURER The Humminbird 7000301 AS HHGPS Bare Wire GPS/NMEA Connection Cable connects a hand-held GPS unit to your fishing system for easy readability of trackplotting information. By using the cable to connect the fishfinder to your handheld GPS unit, you can gain GPS trackplotting capability on the large display of your Matrix 700 or 900 Series unit. By using this cable to transfer the GPS trackplotting data, you can more readily view this information in an integrated form with your Matrix 700 and 900 Series unit. The kit includes NMEA connection cable, Y cable and detailed instructions. See more

1-Year Limited Warranty. Note: this cable should not be used on an APEX, SOLIX, ONIX or ION unit. For APEX, SOLIX, ONIX and ION Series, a AS GPS NMEA should be used. The HHGPS Connection Kit Includes: NMEA connection cable and detailed instructions. Humminbird 300, 500, 600, HELIX 5, and HELIX 7 control heads do not supply power therefore the connected device must be externally powered. Humminbird 700, 800, 900, 1100, HELIX 8, HELIX 9, HELIX 10, HELIX 12, HELIX 15 control heads can supply power to the connected device. This HHGPS cable requires a RS-232 or NMEA 0183 cable from the NMEA0183 device’s manufacture to complete the connection to the Humminbird control head. The HHGPS cable is used to connect a RS-232 and NMEA 0183 devices to the GPS/NMEA port on a 300, 500, 600, 700, 800, 900, 1100, or HELIX Series products with GPS. Supported devices may include DSC VHF, Heading Sensors, GPS, and AIS devices. Your Humminbird control head manual should be referenced to confirm which devices are supported.