Cutting

Cutting a small piece of vinyl for testing the settings.

Cutting side has line texture, facing up during cutting. Smooth side has a clear plastic carrier sheet, facing up during transfer.

All cuts need to be mirrored (flipped) as you are cutting it from the reverse side.

Before Transfer

Know the type of fabric to see if the fabric is suitable for application. And make sure the fabric can withstand iron on temperatures.

Before transfer, preheat your base fabric for 3-5 seconds to remove wrinkles and moisture. If you use home iron, pls make sure no steam.

During Transfer

Transfer Temperature: 305°F/150°C.

Press Time: 10-15 seconds

Peel: Cold

After adhering your design, flip your fabric and repeat on the other side. Use the same settings.

After Transfer

Please note that after 24 hours for the first cleaning.

The reverse cleaning will be better.

Do not dry clean, do not bleach.