Parameter: Use low-power dual-core 32-bit CPU, which can be used as an application processor The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS Built-in 520 KB SRAM, external 8MB PSRAM Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces Support OV2640 and OV7670 cameras, built-in flash Support picture wireless upload Support TF card Support multiple sleep modes Embedded Lwip and FreeRTOS Support STA/AP/STA+AP working mode Support Smart Config/AirKiss one-click network configuration Support secondary development Specifications Working voltage 4.75-5.25V SPIFlash default 32Mbit RAM internal 520KB + external 8MB PSRAM Support interface (2Mbps) UART, SPI, I2C, PWM Support TF card, maximum support 4G IO port 9 Serial port rate default 115200bps Image output format: JPEG (only OV2640 support), BMP, GRAYSCALE Packaging method DIP-16 Power consumption Turn off the flash: 180mA@5V Turn on the flash and adjust the brightness to the maximum: 310mA@5V Deep-sleep: The lowest power consumption can reach 6mA@5V Moderm-sleep: the lowest can reach 20mA@5V Light-sleep: the lowest can reach 6.7mA@5V Security WPA/WPA2/WPA2-Enterprise/WPS Working temperature -20 ?~ 70 ? Storage environment -40 ?~ 125 ?, <90%RH Package Included: 2 x ESP32-CAM Module 2 x Camera Module OV2640 2MP See moreESP-32CAM can be widely used in various IoT applications. Suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, etc. It is an ideal solution for IoT applications. The ESP-32CAM comes in a DIP package that plugs directly into the backplane for rapid production. Built-in 520 KB SRAM , external 8MB PSRAM ,support UART/SPI/I2C/PWM/ADC/DAC and other interfaces;Support picture wireless upload, TF card, multiple sleep modes, STA/AP/STA+AP working mode, secondary development. The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS. ESP32CAM is based on ESP32 chip and OV2640, use low-power dual-core 32-bit CPU, which can be used as an application processor.