HITPREX DTF Transfer Film(Direct to Film Transfer Paper)

Specifications

Size: A4(8.3" x 11.7" / 21cm×29.7cm)

Quantity: 20Sheets

Double-sided: Both sides are rough and coated, only one side is the printing side, and the coating on the other side is to increase the friction of the pulley and make the paper run more smoothly

Why Choose HITPREX DTF Film

Create Artwork/Gifts/Products That You Define

1. You can design and make the art patterns you want and transfer them to the items you want, Such as T-shirts, pillows, caps, gloves, sneakers, phone cases etc!

2. You can create unique gifts, customized just for someone!

3. You can sell DTF transfer items and start your new business!

How to Use:

Step 1: Print your design on PET film.

Step 2: Shake powder, let the hot melt powder stick to the printed pattern, then shake off the excess powder.

Step 3: Put the film with hot melt powder into the oven and bake until the hot melt powder melts. Temp: 266-320/ 130-160, Time: 2min-5min.

Step 4: Lay the patterned side of the treated film flat on the garment you want the pattern to be printed on. Heat press the film with a heat press machine. Temp: 302-329/ 150-165, Time: 10s-15s.

Step 5: Slowly tear off the PET film along any corner.

FQA

Question 1. How do I distinguish between the printable side and the non-printable side

Answer:

• The matte side is the printable side and the smoother side is the non-printable side.
• When you scrape the different sides with your fingernail, the printable side will show obvious scratches.
• We have marked (Printed Side) on the package, please take out the dtf film in the correct direction.

Question 2. Which printer is this suitable for

Answer: Fit with Epson & All Modified Desktop DTF Printers.

Question 3. Which ink do I need

Answer: DTF printing is a coating printing, need to use DTF printer, DTF ink, DTF powder.

Question 4. Can I use a heat press to melt the DTF powder

No, It is difficult to control the temperature with a heat press. Because the temperature of the heat press is too high, the material of the DTF film will be melted in the pattern, and the DTF film will be difficult to tear off. Even if it is torn off, the pattern may not come off completely after transfer.

Question 5. Can this be used with a sawgrass sublimation ink printer

It can be used for sublimation printer and sublimation ink. But it can't be used for white pattern, because sublimation ink doesn't have white ink. Moreover, the DTF hot-melt adhesive powder will not be able to stick to the pattern well, which will cause the pattern to be unstable, scratch-resistant, and cracked.

Question 6. Can I transfer directly without melting the DTF powder

Yes, but you need to make sure that the powder can be spread evenly on the pattern. (If the powder is not spread evenly, it may cause air bubbles in the pattern, which is why the powder needs to be melted in the oven.)