HG tile cleaner extra strong

Remove stubborn grease, dirt and other problem grime from floor tiles, flagstones and all types of natural stone with this tile cleaner.

This extremely powerful tile cleaning product from HG is also suitable for use with a scrubbing machine.

1 litre is sufficient for approximately 35 to 70m2 of floor surface, depending on the amount of dirt.

HG tile cleaner shine restorer

This tile shine restorer and cleaner was developed for regular, simple and quick cleaning of porous and non-porous floor tiles, flagstones and non-calciferous natural stone. This tile shine restorer also deepens the colour and structure of the tiles.

1 litre is sufficient for 20 washes.

HG tile protector

The wafer-thin yet extremely protective tile coating protects floor tiles against wear, scratches and other damage. HG protective coating satin finish also deepens the colour and structure of the floor tiles. This protective tile coating for floor tiles, flagstone and slate also masks existing worn patches and even has a non-slip effect. 1 litre is sufficient for approximately 40 m2 per layer.

HG tile cleaner extra strong

1. Dissolve half a litre of the product in half a bucket (5L) of lukewarm water.
2. Apply it liberally to the surface to be cleaned with a floor cloth or mop. Do not treat more than 10 to 15m² at a time.
3. Scrub the surface well with a stiff broom or scrubbing brush.
4. Leave it to work for a few minutes and scrub well once more.
5. Then use a mop to remove the liquid from the surface.
6. Mop the floor well with clean water.
7. The result is a clean tile floor!

HG tile cleaner shine restorer

1. Dissolve 50ml (half a cup) of the product in half a bucket (5L) of lukewarm water.
2. Clean the floor with a well wrung-out mop or floor cloth, regularly rinsing it in the cleaning solution.
3. Do not rinse or mop dry, simply leave the floor to dry on its own.

HG tile protector

1. The surface must be completely clean and free of grease and dust.
2. The glue/paste and grout of new floor must be completely cured and dry. This usually takes 4-6 weeks of drying.
3. Do not shake before use and preferably apply with a wax spreader (see bottleneck label on the front). It is also possible to use a lint-free, clean towel wrapped around a squeegee. On rough surfaces use a (long-pile) paint roller.
4. Pour the tile finish liquid onto the floor and apply evenly in straight lanes and in one direction. Do not use circular motions or pressure.
5. Once the product has dried (after about 40 minutes), a second layer can be applied in the opposite direction onto the first layer.