kvm switch 2 monitors 2 computers hdmi edid extend display hotkey switching

kvm switch 2 monitors 2 computers hdmi edid extend display

kvm switch 2 monitors 2 computers hdmi edid extend display

kvm switch 2 monitors 2 computers hdmi edid emulator

kvm switch 2 monitors 2 computers hdmi edid emulator

kvm switch 2 monitors 2 computers hdmi edid emulator

kvm switch 2 monitors 2 computers hdmi edid support 4k 60hz,3440*1440 100hz, 2560*1440 120hz, 2560*1440 144hz.

hdmi kvm switch 2 monitor 2 computers edid emulator cross out 4k 60hz

hdmi kvm switch 2 monitor 2 computers edid emulator cross out 4k 60hz

hdmi kvm switch 2 monitor 2 computers edid emulator cross out 4k 60hz

Detailed hotkeys:

It is recommended to control the completion of the hotkey combination within 1.5-2 seconds. If there is no special requirement, use the mouse as much as possible Hotkeys are more convenient and fast. Mouse hotkey: Double-click the wheel key+left or right button(switch between two computers) Note:Mouse hotkey can only control the KVM switching mode, cannot control the KVMmatrix mode matrix mode can only be achieved by keyboard hotkeys or device keys. Keyboard hotkeys:The initial default hotkey is right CTRL, if using right CTRL will conflict with other functions, the hotkey can be changed to:CTRL left,NUMLOCK,SCROLLLOCK Method of changing hotkeys:Current hotkey+current hotkey+specified hotkey+Enter For example, if the hotkey is set to [Numlock] and the current hotkey is right CTRL, Right Ctrl+Right Ctrl+Numlock +ENTER Hotkey combination description:

1: Right Ctrl+Right Ctrl+[1]+Enter The PC1 Switch mode

2: Right Ctrl+Right Ctrl+[2]+Enter Switch to PC2 Switch mode

3: Right Ctrl+Right Ctrl+[3]+Enter Switch to PC1A+PC2A Matrix mode ,hdmi Cross output and USB follows PC1

4: Right Ctrl+Right Ctrl+[4]+Enter Switch to PC2A+PC1A Matrix mode ,hdmi Cross output and USB follows PC2

5: Right Ctrl+Right Ctrl+[B]+Enter Enables or disables the buzzer sound

6: Right Ctrl+Right Ctrl+[S]+Enter Enables or disables the automatic scanning function

7. Right Ctrl+Right Ctrl+[S]+[Number]+Enter Set automatic scanning time (8 to 999 5S) The default value is 8 seconds

kvm matrix hdmi edid cross display 4k 60hz

kvm matrix hdmi edid cross display 4k 60hz

kvm matrix hdmi edid cross display 4k 60hz

there severl way to switch ,boutton switch,hotkey switching

1: Right Ctrl+Right Ctrl+[1]+Enter The PC1 Switch mode

2: Right Ctrl+Right Ctrl+[2]+Enter Switch to PC2 Switch mode

3: Right Ctrl+Right Ctrl+[3]+Enter Switch to PC1A+PC2A Matrix mode ,hdmi Cross output and USB follows PC1

4: Right Ctrl+Right Ctrl+[4]+Enter Switch to PC2A+PC1A Matrix mode ,hdmi Cross output and USB follows PC2

5: Right Ctrl+Right Ctrl+[B]+Enter Enables or disables the buzzer sound

6: Right Ctrl+Right Ctrl+[S]+Enter Enables or disables the automatic scanning function

7. Right Ctrl+Right Ctrl+[S]+[Number]+Enter Set automatic scanning time (8 to 999 5S) The default value is 8 seconds

kvm switch dual monitor 2 computers edid

kvm switch dual monitor 2 computers edid

kvm switch dual monitor 2 computers edid

1. Use dp to hdmi +kvm switch hdmi ,them can be used as displayport matrix kvm edid.

2. Use type c to hdmi +kvm switch hdmi ,them can be used as type c matrix kvm edid.