HDMI kvm switch 2 monitors 2 computers edid emulator ,hotkey switching , 4k@60hz

kvm switch 2 moniotrs 2 computers hdmi edid

• The 8K ultra HD HDMI dual screen KVM switcherthat controls and manages multi-interface graphics cards via a set of USB keyboard and mouse Computers and other equipment. Each channel supports two 8K HDMI signals and one USB3.0 data input, and two sets of HDMI signals can be freely controlled and defined Main and secondary screens
• The smart KVM switch is widely used in office, drawing,modeling, e-sports,entertainment, etc.It is an efficient little helper for your work and life.

HOTKEY

• It is recommended to control the completion of the hotkey combination with in1.5-2S. If there is no special requirement, it is more convenient to use the mouse hotkey as much as possible.
• Mouse hotkey:Double click wheel key+left or right button(switch between two computers)
• Keyboard hotkey:The initial default hotkey is the right CTRL of the keyboard, if you use the right CTRL will conflict with other functions, Hotkeys can be changed to: Left CTRL,NUMLOCK,SCROLL LOCK.For example, the hotkey is set to Numlock key:current hot key+current hot key +Numlock+Enter

kvm switch 2 moniotrs 2 computers hdmi edid 4k 144hz

hdmi kvm switch 2 monitors 2 computers edid emulator ,hotkey switching

Hotkey combination description:

• current hotkey+current hot key+1,2+Enter Switch to the specified port
• Current hotkey+ current hot key+B+Enter Enables or disables the buzzer sound
• Current hotkey+Current hot key+S+Enter Enables or disables the automatic scanning function Current Hot key+ Current hot key+S+Number+Enter Set the automatic scanning time (8 to 999 seconds). The default value is 8 seconds
• Current hotkey+current hot key+T+Enter Enable or disable the USB automatic recognition function, when this function is enabled, the switcher will automatically Detect computer USB ports.When a computer is shut down or the USB cable is removed, it will automatically jump to the next computer that is powered on When a computer is powered on or the USB cable is re-plugged, it automatically redirects to the computer 5:Current hot key +current hot key+R+Enter Resets the KVM system and restores factory Settings

Note:The computer host input needs to be connected to three cables (two HDMI cables and one USB data cable)

kvm switch hdmi 2 monitors 2 computers edid 4k 144hz

dual monitor kvm switch hdmi edid emulator hotkey Switching

PARTS LIST:

• KVM HOST x1
• USB3.0 CABLE x2 (1.5M)
• HDMI V2.1 CABLE X4 (1.5M) Note:optional
• Wire-desktop controller x1 (1.5M)
• TYPE-C Power CABLEx1 (1M)
• User manualx1