Main Functions:
1. Cut off the Oil and Power System:
- "Execute immediately mode": Send the command "quickstop+password" to the tracker, and it will respond with "quickstop OK." The tracker will stop the car immediately after the "stop" command is issued.
- "Execute depends on speed mode" (Default mode): Send the command "noquickstop+password" to the tracker, and it will reply with "noquickstop OK." In this mode, the tracker won't stop the car immediately after the "stop" command is given. Instead, it will respond with "it will be execute d after speed less than 20KM/H" and stop the car when the speed is less than 20KM/H.
2. Single Locating:
- If any authorized numbers are set up, the tracker will reply to all calls with location reports. Only authorized numbers can receive location reports from the tracker.
- When the tracker is dialed from an authorized number, it will hang up the call and respond with an SMS containing a Google Maps link and real-time latitude and longitude.
- In case of lost GPS signal, the tracker will use LBS/CELL-ID for tracking. The replied SMS will include two positions:GPS coordinates of the last known position. LAC code. To locate using LBS technology, visit www.gpstrackerxy. com, find "manual track," and input the received code in the LAC and Cell-ID fields.
3. Auto track continuously:
- To track with limited times upon a time interval, send the SMS command "fix030s005n +password" to the tracker device. It will report the position information every 30 seconds for a total of 5 times.
- To track with unlimited times upon a time interval, send the SMS "fix030s030m***n+password" to the tracker. The tracker will report a real-time location every 30 seconds when the vehicle's ACC is ON, and every 30 minutes when the ACC is OFF. Note that the interval must not be less than 10 seconds.
- Smart track upon time and distance interval means that the device can be tracked based on two preset factors: time and distance.
4. Turning points update automatically:
- In GPRS mode, the tracker automatically updates the position information to the web server when the vehicle changes driving direction beyond a pre-set angle value. This ensures a smooth and accurate trajectory representation on the actual road.
5. “Track” and “Monitor” modes switch:
- The default mode is “track” (Track mode), if you want to monitor the voice around the device please send "monitor+password" to tracker to switch it to monitor mode, then you make call to the SIM number in the tracker you will can monitor the voice around it; you can send "tracker+password" to swtich the device back to track mode.
6. GPS drift suppression:
- The "suppress" function is deactivated by default. To activate it, send "suppress+password" to the tracker, and it will reply "suppress drift ok." When the vehicle is not driving (ACC is OFF), the GPS data remains constant. The GPS data updates automatically when the vehicle is in motion (ACC is