The fully shielded Cat. 6A patch panel from Good Connections is made of sturdy 1.5 mm sheet steel and suitable for Ethernet networks up to 10 Gigabit/s. On the front, different network devices can be connected using RJ45 patch cables. On the back, the solid or stranded cables are connected via LSA strips. Tool-free opening and closing. The housing cover is attached with two screws. These can be loosened or tightened either with a screwdriver or by hand. Technical specification: - Cat. 6A ch ANSI/TIA/EIA 568 C.2 standard - S19 version with 24 ports - Suitable for 10 Gigabit/s Ethernet and for transmission frequencies up to 500 MHz - Complete shielding of RJ45 sockets and LSA strips - Connection strips with colour marking according to TIA 568 A/B - Cable installation via LSA strips - For Solid and LitzCable with cable diameters from 22-26 AWG - Cable attachment with strain relief - 1.5 mm sheet steel housing - Cable tie fixing option - Central ground connection - 1 height unit [U] - Operating temperature range: -20 °C to +60 °C Colour: Jet Black (RAL9005) Dimensions (WxDxH): 482.6 x 100 x 4.5 Box contents: 1 x patch panel including grounding cable, 1 x illustrated instructions (English language not guaranteed), 12 x cable ties (small), 4 x cable ties (large)

Colour: Jet Black (RAL9005) / Dimensions (WxDxH): 482.6 x 100 x 22 mm. Cable installation via LSA strips (colour marking according to TIA 568 A/B) - for solid and stranded cables (22-26 AWG). Shielded (STP) + complete shielding of RJ45 sockets and LSA strips + central earth connection. Cat. 6A / Category 6A - Suitable for 10 Gigabit/s Ethernet and for transmission frequencies up to 500 MHz. Patch panel / patch panel / distribution panel - 19 inch / 19 inch version with 24 ports.