GLEAN Patio Grout Resin Residue Remover is specifically designed to tackle epoxy, acrylic, and silicone residues commonly left behind by cement-free brush-in jointing compounds. The advanced, non-caustic formula softens hardened residue making removal quick and easy. The non-drip formula is safe for use on Natural Stone and Porcelain paving and is suitable for interior and exterior use. SHAKE WELL BEFORE USE: Shake bottle well before use. Always test on an inconspicuous area prior to general use. PREPARATION: Ensure that the surface to be treated is completely clean and dry. If necessary, first wash the surface with GLEAN Heavy Duty Floor & Stone Degreaser. Rinse well with water to finish and leave to dry. REMOVING RESIDUE: Apply generously by dabbing or rolling onto the surface. Work in manageable areas at a time and do not brush out. Leave for up to 30 minutes. If drying should occur within 30 minutes apply a little more solution to keep it wet. Use a stiff short haired brush or nylon scrubbing pad to remove the softened residues from the surface. Add a little water and scrub again. Extract the released residues using a sponge or wet vac and rinse with water. Repeat the process if unwanted material remains. TO FINISH: Use GLEAN Heavy Duty Floor & Stone Degreaser diluted 1: 5 in warm water. Apply with a light pressure sprayer or watering can. Agitate the surface using a deck brush or nylon scrubbing pad. Rinse by hosing off thoroughly with clean water. *Do not apply during rain, frost or when surface air temperature is under 5?C or over 30?C. Use gloves and protective googles if there is a risk of direct contact or splashing.

COVERAGE: 10 sq/m per litre. DRIP FREE: Non-drip formulation for easy application and maximum coverage. VERSATILE APPLICATION: Ideal for a variety of outdoor and indoor spaces, including patios, walkways, and other paved areas, ensuring a spotless appearance. SIMPLE TO USE: Quick and easy to use, the simple removal process, saves time and effort and helps maintain the beauty of your patio. TAILORED FOR JOINTING COMPOUNDS: Formulated to target residues left by brush-in jointing compounds, speeding up the cleanup process for finished patios. PORCELAIN & NATURAL STONE SAFE: Non-caustic formula is safe for use on Porcelain and Natural Stone surfaces, as well as most other tiled surfaces. PATIO RESIDUE REMOVER: Removes stubborn epoxy, acrylic, and silicone residues from patio surfaces.