Use PoE injector with PD to expand your network to where there are no power lines or outlets,where you wish to fix devices such as APs,IP camera or IP Phone,etc. The PoE injector is a single port poe injector offer a compact and cost effective,it can convert standard 100-240V ac power into low-voltage. DC that runs over existing LAN cable to power up IEEE 802.3af/at compliant network accessories. Remote powering of wireless LAN(WAN) access points,IP security cameras,VoIP telephone and other low port density installations. Features: Up to 15.4W (Max 24watt) of Power on 2-pairs Supports 10/100/1000 Base-T applications Led indicators power input and poe output Internal ac/dc converter no need for external power brick easy plug and play installation Muti-protection Specification: Pass Through Data Rates: 10/100/1000Mbps Out Power Voltage: 48~56VDC User Port Power: 15.4Watt, Max 24W Power Budget AC Input Voltage: 100-240VAC Ac Input Current: 0.5A 100-240VAC AC Frequency: 50 to 60 HZ Dimensions: 85x42x30 mm System Indicator: AC power Connectors: shielded RJ-45,EIA 568A and 568B Operating Ambient Temperature: -0 to 40 ? Storage Temperature: -40 to 60 ? Installation Steps 1.Use a CAT5e UTP cable to connect port of Ethernet devices to the DATA IN port 2.Connect AC cable with Injector and Socket 3.Connect the PoE OUT port to a PD with CAT5 UTP cable

Compact and cost effective PoE injector which offer multiple protection, such as over current protection, over load protection, over voltage protection and anti-interference protection. Plug & play, no configuration is needed, simply connect a PoE network device to this poe adapter, accommodates most installations scenarios. Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away. 1 Gigabit Ethernet port input and 1 PoE+ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds. IEEE 802.3af compliant PoE injector, up to 24 watt PoE power supply.