Feature: This PoE Gigabit injector adapter allows an Ethernet-enabled device to be placed 328ft away from a power outlet. Ethernet terminals such as wireless LAN access point, IP phone, and web camera are powered remotely. It is especially design for outdoor networking facility and low port density installations. Applications: IP Phone Wireless Access point and client devices Security IP Camera Systems Specification: Input: AC100-240V 50/60Hz 90 percent efficient , Data In: 10/100 or gigabit speeds, Connects to network switch or router, Output: Data & Power,powers all 802.3af devices ( no auto negotiation ) power on all the time; Not intended for non-PoE devices output: 48Vdc 0.5Amp 24 watts max.; Power feed: Support Both Mode A and Mode B pins ( Mode A pins 1/2+, 7/8 return; Mode B pins 4/5+,7/8 return) Data rate: 10/100Mbps; PoE Power Transmission Distance: Up to 100m Package Contents 1x PLUSPOE 48V Wall Gigabit PoE Injector

Compact and cost effective PoE+ injector which offer multiple protection, such as over current protection, over load protection, over voltage protection and anti-interference protection.IEEE 802.3af compliant. Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios. Converts a non-PoE Gigabit port to a PoE Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away. Auto sensing technology delivers up to 24W to an 802.3af PoE device with backwards compatibility for 802.3af PoE (15.4W) devices. Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.