Note: This PoE injector work for 10/100/1000Mbps Gigabit network. The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power. The iCreatin PoE Injector can easily connect any IEEE 802.3af-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch. Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. It is also protect your products from overloads over 350mA and high voltages exceeding 52V. Specifications 2 Gigabit Ethernet ports 48-52V output voltage , up to 15.4W rated power, support IEEE802.3af, Power feed: V+ 4,5; V- 7,8; Data rate: 10/100/1000Mbps. Deliver power up to about 328.1 feet(100 meters) Support 100-240V voltage input What in Box? 1 x US wall plug Gigabit PoE injector See more

Compatible with TL-POE150S and most Gigabit 802.3af IP camera, IP Phone, Wireless IP point and other PoE devices. Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios.Whether you want to use it with an IP camera in your home or work place, a VoIP phone used in a conference room, or use it to provide power and network to a wireless AP, this item is very suitable as long as your device is 802.3af standard 48V PoE. Compact and cost effective PoE+ injector which offer multiple protection, such as over current protection, over load protection, over voltage protection and anti-interference protection.IEEE 802.3af compliant. Gigabit Ethernet Speed. This PoE injector equiped with 1 Gigabit Ethernet port input and 1 PoE Gigabit Ethernet port output, which can offer up to 2Gbps full duplex Ethernet speeds. Converts a non-PoE Gigabit port to a PoE Gigabit port and network a PoE device located up to 100 meters (328 ft.) Away. If you have a PoE (802.3af) standard device, and need to use PoE technology to provide it with both network and power.