Gigabit POE Extender 4 Port 4 Channel PoE Repeater RJ45 4-Port POE Splitter 10/100/1000Mbps PoE Amplifier IEEE 802.3bt 802.3at 802.3af Plug and Play

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

Gigabit POE Extender 4 Port 4 Channel PoE Repeater RJ45 4-Port POE Splitter 10/100/1000Mbps PoE Amplifier IEEE 802.3bt 802.3at 802.3af Plug and Play

Regular Price: US$77.99

Special Price US$64.99

Availability: In stock

Supplier: exgoofit

Category: Electronics Networking

Qty:

Features:

Comply with IEEE 802.3af/at/BT Power over Ethernet

Gigabit 1 POE to 4 POE,10/100/1000Mbps Supported

Extender the range of PoE an additional 250 meters

Automatically detects and protects PoE equipments from being damaged by incorrect installation

Plug-and Play no configuration required

60W Gigabit 4 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 ,Cat5e,Cat6,Cat6e,UTP cable.

Product Review:

60W Gigabit 4-Port PoE Extender has 10/100/1000Mbps Lan ports,among them,one for power input,the other for power output.

Comply with 100/1000BASE-TX,IEEE 802.3 af/at/BT-PoE. Power input for single port is 60W (POE++,BT) . Power output for single port is 30W

Applicable Range: Used with AP,IP camera,IP telephone and the other network equipments in the situation of the lack of power line or far away from the power outlets Installed at hotels,schools,buildings,villages,etc.

Other Specification:

PoE input: 1 RJ45 port PoE output: 4 RJ45 port

Network Medium: Cat5 or better UTP cables (less than 250m)

Repeater Mode: Store and forward MAC Address Table: 8K Packet Buffer Memory: 126 Byte

Switching Capacity: 8000Mbps PoE Standard: IEEE 802.3af/at/BT

Input power: 60W Output power: 30W (max) Power Supply Type: 1/2+,3/6-,Mode A,End-Span

Network Protocol: IEEE 802.3i-100BASE-T, IEEE 802.3u: 1000BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3at/BT-Power over Ethernet;

Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU,Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC;

Storage Humidity: 5%~90%, No Condensation; Dimension: 95x70x21mm Weight: 173g

Note:

Please don't place any heavy thing on the PoE extender;

To prevent the water seeping into the extender, please keep PoE extender away wet environment;

Suggest to use PoE extender indoors.When installing the extender in outdoor,please install it in a waterproof place.

(60W)Gigabit 1 to 4 POE Extender Technical Parameter

Model	Gigabit 1 to 4 POE Extend
Number of Channel	4 POE
POE Out	1/2(+), 3/6(-); MAX Power 30W
Indicators	LED indicators are located on the RJ45 connector Power indicator: PoE enabled
Connectors	Shielded RJ45, EIA 568A and 568B
Network Cable	Shielded Cat5,Cat5e,Cat6 or better

Dimension	95x70x21mm
Physical Property	Input Voltage:POE 44-57V, POE input:60W (BT, POE++, HI-POE ,) Output Voltage: 48V POE out :30W (Max) Weight:173 g Extension Distance:250m (max)
Condition	Working temperature: -35°c to 75°c Working humidity: MAX to 90%, non-condensation MTBF: 100,000h at 25°c
Regulatory compliance	IEEE802.3af / at / BT, RoHS Compliant, CE, FCC
EMC	FCC Part15, Class B
Extending Distance	250m (max)

Plug and play installation - no configuration need. Cost effective installation - no need for local power. Normal and WLan Mode: 1000Mbps, up to 100m PoE extend. Extend Mode: 10Mbps, up to 250M PoE extend. Provides IEEE802.3af /at power levels when powered by any IEEE802.3at/BT source, Extenders can be cascaded to reach up to 1000m. The 60W Gigabit PoE Extender supports 10/100/1000Mbps data rates and delivers 802.3af/at/BT power levels, up to 30W, The PoE Extender does not require local power and is powered via the PoE input.Extended PoE installation range by additional 250m. Gigabit 1 to 4 POE Extender 60W. It is a cost effective way to extend the Ethernet network range beyond 250m(max), delivering both data and power to network devices such as WLAN Access Points and Network Cameras up to a distance of 250m while complying with IEEE802.3at/BT PoE and Data standards.