Display port kvm switch 2 monitors 2 computers 4k 144hz,8k@60hz , hotkey switching

Display port kvm switch 2 monitors 2 computers 4k 240hz

There are four ways to Switch PC1TO PC2

• Button mode:push the switch button on the kvm switch Indicated you can switch to PC1 or PC2 by pushing theswitch button
• Wired remote button mode:you can switch PC1 or PC2 by Wired remote button
• Mouse mode:Double Click the middle roller of mouse+LB(Left Button),you can switch to PCl,Double Click the middle roller of mouse +RB(Riqht Button),you can switch to PC2.
• Keyboard Hotkey Mode:You need to put the Hotkey button,them the Hotkey indcate on,right Control two times and number1 and Enter(Ctrl+ctrl1+1+Enter),you will switch to PC1,and (Ctrl+ctrl+2+Enter) you will switch to PC2

There are three Display Modes

• Extended Display
• Mirrored Display
• Spliced Display

Support most major 0S including Windows,LinUx, Mac and more.

kvm switch 2 monitors 2 computers dp

Kvm switch 2 monitors 2 computers Displayport

Keyboard hotkey

Default switching command:Right CTRL+Right CTRL+1~4+ENTER (the number key and enter key on the big keyboard and small keyboard can be selected at wil)

1.Change the switching instructions(for the convenience of customeroperation, the reference key of replacing the hotkey combination is the right CTRL on the keyboard):

• Right CTRL+right CTRL+NUMLOCK+ENTER The current toggle command will be changed to NUMLOCK+NUMLOCK+1 to 4+ENTER
• Right CTRL+right CTRL+CAP5L0CK+ENTER The Current switchover Command is changed to CAPSLOCK+CAPSLOCK+1 to 4+ENTER
• Right CTRL+right CTRL+SCROLL LOCK+ENTER The current Switchover command is changed to SCROLL LOCK+5CROLL L0CK +1 to 4+ENTER
• Right CTRL+Right CTRL+CTRL(Ieft)+ENTER The current toggle Command will bechanged to:CTRL(left)+CTRL(Ieft)+1~4+ENTER
• Restore the default switching command:right CTRL+right CTRL+ CTRL(right)+ENTER

Note:On a MAC operating system,you are not advised to set the SCROLL L0CK command tothe hot key.Double-clicking SCROLL LOCK adjusts screen brightness on a MAC operating system. Otherwise, the hot key conflicts.

?Kvm switch 2 monitors 2 computers Display port

Display port KVM Switch 2 monitors 2 computers

Mouse hotkey

2. Mouse switch

• Double-click the wheel key+left button on one
• Double-click the wheel key?right button the next one
• Open or close the mouse switch command:right CTRL+ right CTRL+M+ENTER

3. Turn on or off the buzzer tone Current Hotkey +Current hotkey+B+ENTER

4. open or close the automatic identification port(the system isset to open the automatic identification port by default)Current hot key+Current hot key +T+ENTER

5.Enable or disable automatic scanning Current hotkey+Current hotkey +S+ENTER

6.scan time Settings(default loop jump time is 8S)Current Hotkey+Current hotkey+S+8 to 999+ENTER

7.Restore factory Settings Current hotkey+Current hot key+R+ENTER

?Dual Monitor kvm Switch displayport 4K 240Hz

Dual Monitor kvm Switch displayport 4K 144Hz

Dual Monitor kvm Switch displayport 1440P

Displayport video mode

2K2560*144012OHz144Hz165Hz 24OHz

4K3840*216012OHz144Hz165Hz240Hz

5K5120*144012OHz144Hz165Hz240Hz

8K6OHz

What's in the box

• 2 port USB3.0 Dual Monitor KVM Display Port xl
• Wired Remote x1
• USB3.0 Cables USB-A T0 USB-B x2
• Displayport 1.4 Cables x4
• USB-ATo USB-C Power Cable x1
• User manual xl