kvm switch 2 monitors 2 computers display port and hdmi 4k 144hz, Hotkey Switching ,Aluminum Shell, with Cables

usb 3.0 dual monitor kvm switch displayport hdmi

kvm switch 2 monitors 2 computers hdmi display port

Attention,please:

Can not support docking station , Adapters will be needed if your computer does not have dual DP outputs, powered HDMI to DP or USB C to DP adapters are preferred; This DisplayPort KVM switch does not support EDID emulation ,so the desktop locations may change upon switching and boot-up.

1,If all the cables are plugged in the Displayport kvm switch dual monitor 2 computer and it does not work, please re-plug the power cable.

2,If the Display port kvm switch dual monitor 2 computer lights are normal, try to replace the input and output DP Cables,

3,If the input and output DP cables are replaced and the video cannot be appear normally, you can try to unplug and plug the DP interface of the computer or try to replace the DP input interface of the monitor;

4:The 2 in 2 out displayport kvm can not pass with Boot Bios,and the computer switch for 2 computers dual monitor display port can not support USB-C to DP,The computer switch for 2 computers dual monitor displayport cannot support mac. The display port kvm switch dual monitor cannot support Laptop (usb-c output)

1. Kvm Switch 2 monitors 2 computers Display port Support DP 2.0 8K 60hz HDR 4K 175HZ 4K 240HZ With Displayport Equalizer, Long cable

2. Kvm Switch 2 monitors 2 computers Displayport Support DP1.4 8K 60hz RGB/YUV4:4:4, 8K@30HZ,4K@144HZ ,4K@120Hz ,5120X1440@60HZ,5120X1440@75HZ,5120X1440@144HZ,5120X1440@165HZ;

3. Support DP1.3

5120X2880@60HZ,3440x1440@75Hz,3440x1440@100Hz,3440x1440@144Hz,3440x1440@165Hz,3440x1440@175Hz;

2560*1440 144Hz,2560*1440@165Hz ;3200*1800@60Hz,3200*1800@144Hz; 3840*1080@144Hz,3840*1080@240Hz; 3440*1600@144Hz,3840*1620@144Hz and so on.

4. Displayport KVM Switch 2 monitors 2 computers Support 1440P 120Hz,1440P 144Hz,1440P 160Hz,1440P 165Hz,1440P 175Hz,1440P 240Hz, 3840x1600 @ 144Hz, FreeSync, G-SYNC

5. Display port KVM Switch 2 monitors 2 computers support USB3.0 5G High Speed ,key board,Mouse, U Disk,USB MST

2 Computers 2 Monitors (HDMI + DP) KVM Switch

Two computers two monitors KVM Switch with HDMI

kvm switch 2 monitors 2 computers hdmi display port

2 port dual monitor kvm switch hdmi + displayport

The Dual Monitor kvm Switch displayport has four switching modes, Mouse hotkey ,Keyboard hotkey,Boutton switching,wired switching .

If the dp kvm switch 2 monitors 2 computers cannot detect your Mouse or your keyboard, please just chose hotkey though to touch the hotkey button.then you can use button switching and wired switching,And you can email to us,we will try our best to fix the problem.

There are four ways to Switch PC-A TO PC-B

1. Button mode: push the switch button on the dual monitor kvm displayport indicated ,you can switch to PC-A or PC-B by pushing the switch button

2. Wired remote button mode: you can switch PC-A or PC-B by Wired remote button which connect to the dp kvm switch dual monitor

3. Mouse mode: Double Click the middle Roller of mouse +LB(Left Button) ,you can switch to PC-A, Double Click the middle roller of mouse +RB(Right Button),you can switch to PC-B.

4. Keyboard Hotkey Mode: You need to put the Hotkey button,them the Hotkey indcate on

Right Control two times and number 1 and Enter(Right Ctrl+Right ctrl+1+Enter),you will switch to PC-A, and (Right Ctrl+Right ctrl+2+Enter) you will switch to PC-B. You can use Keyboard Hotkey (Right Ctrl+Right ctrl+B+Enter) to turn off or turn on the Beep for the dual monitor kvm switch.

kvm switch 2-port, dual monitor, hdmi and display port, two laptops

kvm switch 2 monitors 2 computers displayport hdmi 144hz

2 port dual monitor kvm switch hdmi + displayport

KVM switch displayport and hdmi

1,If all the cables are plugged in the Displayport kvm switch dual monitor 2 computer and it does not work, please re-plug the power cable.

2,If the Display port kvm switch dual monitor 2 computer lights are normal, try to replace the input and output DP Cables,

3,If the input and output DP cables are replaced and the video cannot be appear normally, you can try to unplug and plug the DP interface of the computer or try to replace the DP input interface of the monitor;

4:The 2 in 2 out displayport kvm can not pass with Boot Bios,and the computer switch for 2 computers dual monitor display port can not support USB-C to DP,The computer switch for 2 computers dual monitor displayport cannot support mac. The display port kvm switch dual monitor cannot support Laptop (usb-c output)