Geekworm X708 UPS HAT for Raspberry Pi X708 V2.0(Max 5.1V 6A) UPS HAT& Power Management Board with Power Loss Detection & Safe Shutdown & Auto Power On Function Compatible with Raspberry Pi 4B/3B+/3B

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

Geekworm X708 UPS HAT for Raspberry Pi X708 V2.0(Max 5.1V 6A) UPS HAT& Power Management Board with Power Loss Detection & Safe Shutdown & Auto Power On Function Compatible with Raspberry Pi 4B/3B+/3B

Regular Price: US$77.99

Special Price US$64.99

Availability: In stock

Supplier: Geekworm

Category: Electronics Computers & Accessories Computer Components Single Board Computers

Qty:

[User Manual]: wiki.geekworm.com/X708

Important note: the script must be installed first for the product to work proprely!!!

Overview

The X708 is an advanced uninterruptible power supply expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides 5.1V Max. 8000mA Power Backup for even the most demanding Raspberry Pi set ups, intelligent and safe power management, safe shutdown,AC power loss/ power adapter failure detection , auto power-on, full poweroff from software, and a cooling fan.

The X708 reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications. The X708 can also be used with the X825/X828/X829/X883 (2.5" HDD/SSD Shield) and X857/X862/X872/X873(MSATA/M.2 SSD shield) for safe data backup.

Some Key Features:

Excellent UPS function such as Power Loss Detection(PLD), Automatic Safe Shutdown(ASD), Auto Power On(AON) etc., DC 5V Max. 8A output;
With cooling fan, no extra cooling solution.
HAT size. Separate the battery from the expansion board, which can save a lot of space, which will bring more flexibility.
Reserved two kind battery port (XH2.54 and PH2.0), supports 3.7V 18650 lithium battery and 3.7V lithium polymer battery, No capacity limit, only request 3.7V lithium battery (No include lithium battery)
Must use the battery with built-in protection circuit. About the safety instructions, please refer to wiki: wiki.geekworm.com/X708#Safety_Instructions_and_Warnings

What you may care about

Q1: I want to a NAS storage solution, does X708 support?

A: We have received many feedbacks that want to support UPS, so we design the X708 base on X728, we separated the battery holder from the UPS expansion board to save space, thus X857-C1/X857-C3(metal case for mSata/NGFF NAS solution), X829-C1 (metal case for dual 2.5" sata NAS solution), X825-C7(metal case for singel 2.5" sata NAS solution) can hold the all accessories needed for the complete NAS solution. There metal case can hold 2 cell 18650 battery holder.

Q2: I want to use a larger capacity or more 18650 batteries, what should I do?

A: In this case, the inside space of metal case is definitely not enough, but you can place the battery outside the metal case. We have reserved a hole at the back of the metal casing for you to connect to the battery cable.

Q3: Is there a corresponding UPS NAS solution for 3.5-inch hard drives?

A: Sorry, There is no UPS NAS solution for 3.5-inch hard drive because the 3.5-inch hdd request 12V voltage, so we have no plans to support this demand for the time being. BUT you can refer to X835/X832, and they can solve some of your needs, they need external power supply.

Smart and powerful Uninterruptible Power Supply (UPS)

Provides continuous operations for up to 10~30hours (depending on battery type and qty used)
Max 5.1V 6000mA Power Backup for even the most demanding RPi set ups
Supports 2A/3A fast battery charging
Integrated over current protection and over voltage protection
Integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c); 10-A fully-integrated synchronous boost converter and automatic charging and discharging
Operate in both charge mode and boost mode to allow full system management and battery power mgt
Integrated IN-to-SYS pass-through path to pass the input voltage to the system
Advanced system power-path management avoids batteries frequent charging and discharging and allows 3A fast charging and powering Raspberry Pi at the same time
On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
Batteries attach via PH2.0-2P or XH2.54-2P

Intelligent and safe power management

Equipped with momentary button for easy power control
Press the button to turn on
Press the button and hold for 1~2seconds to reboot
Press the button and hold for 3~7seconds to implement safe shutdown
Press the button and hold for >8seconds to force shutdown
Supports safe shutdown and full poweroff from software
On-board blue LED shows the status of power on, reboot and shutdown
AC power loss or power adapter failure detection (LED and GPIO indication)
Optional to enable Auto power on when power applied or restored
Automatic safe shutdown when battery low (voltage <3.0V)
Ultra-low standby power consumption to maximize battery life

Integrated cooling fan that allows the heat from your Raspberry Pi to dissipate!

Completely solve the overheating problem of your Raspberry Pi
Efficient drop temp of Raspberry Pi CPU

X708 Specifications

For Use With	Raspberry Pi 4 Model B/ 3 Model B+ / 3 Model B / 3 Model A+/ 2 Model B / 1 Model B+
Operating System	Raspbian Stretch ; Safe shutdown function tested for Raspbian, other operating systems to be tested and advised
Power Supply	Via Type-C socket: 5Vdc ±5%, =3A; Via DC power jack: 5Vdc ±5%, =4A
UPS Output	5.1V ±5% Max 8A
UPS Charging Current	1.8~2.2A / 2.3~3.2A
Terminal Battery Voltage	4.24V
Recharge Threshold	4.1V
Battery Requirement	3.7 Lithium Battery (1. Working voltage: 3.6V-3.7V 2. Maximum voltage after full: 4.2V)
PCB Size	65x55mm
Accessories	X708-A1 8-cell Battery Holder(ASIN: B08L5W8NJ3) , X728-A2 2-cell Battery Holder(ASIN: B08B5SW3TF)

[How to Power]

Power via X708, do not power via Raspberry Pi!!!

Via Type-C socket of X708 : 5Vdc ±5%, =3A (Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND).)
Via DC power jack of X708 : 5Vdc ±5%, =4A

[Match Metal Case]

Please refer to the 2022 new release X728-C1 metal case.(ASIN:B09Z6C64NN)

Packing List

1x X708 V2.0 Expansion Board
8x M2.5 *5mm Screws
4x M2.5 *12+6mm Spacers
4x M2.5 *12mm Spacers
1x Jumper link Pitch 2.54mm
1x 2-Cell 18650 battery holder

Important note: the script must be installed first for the product to work properly!!!. [Case for X708]Match metal case for Raspberry Pi 4 and X708, refer to X728-C1(: B09Z6C64NN), X728-C1 does not support X708-A1/X728-A2. X825-C8 case does not support X708. Reserved two kind battery port (XH2.54 and PH2.0), supports 3.7V 18650 lithium battery and 3.7V lithium polymer battery, No capacity limit, only request 3.7V lithium battery (No include lithium battery) ; Add more battery, pls refer to X708-A1 8-cell Battery Holder(: B08L5W8NJ3) or X728-A2(: B08B5SW3TF). [How to Power&Specifications]Power supply via Type-C socket: 5Vdc ±5%, =3A; Via DC power jack: 5Vdc ±5%, =4A; UPS output : 5.1V ±5% Max 6A; UPS charging current: 1.8~2.2A / 2.3~3.2A; Terminal Battery Voltage : 4.24V;Recharge Threshold : 4.1V; Battery: 3.7V Lithium Battery. [Compatibility&Cooling]Compatible with Raspberry Pi 4 Model B, Raspberry Pi 3B+/3B/2B/ B+; With cooling fan for heat dissaption of your Raspberry Pi, no need extra cooling solution. [Function]X708 provides UPS function such as Power Loss Detection(PLD), Automatic Safe Shutdown(ASD), Auto Power On(AON) etc., DC 5V Max. 6A output;Document pls refer to geekworm WiKi search X708;.