Geekworm for Raspberry Pi 4 mSATA SSD Adapter X857 V2.0 mSATA SSD Expansion Board USB3.0 Module Compatible with Raspberry Pi 4 Model B UASP Supported ONLY

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

Geekworm for Raspberry Pi 4 mSATA SSD Adapter X857 V2.0 mSATA SSD Expansion Board USB3.0 Module Compatible with Raspberry Pi 4 Model B UASP Supported ONLY

Regular Price: US$59.99

Special Price US$49.99

Availability: In stock

Supplier: Geekworm

Category: Electronics Computers & Accessories Computer Components Single Board Computers

Qty:

About the EMC Interference Issue:

We are trying to solve the issue of EMC interference between Raspberry Pi 4 and USB3.0 device with X862 V2.0, X857 V2.0 and X873 V1.2. But we get several feedback that if the external USB device (like mouse, keyboard, display) connected, the system maybe unstable or not boot from the SSD. It suggest to use a USB3 type A to USB3 type A male-to-male cable to replace the USB connetor to test.

If you use WIFI, please use the 5.8G wifi AP instead of 2.4G wifi, the 5.8G will be more stable.

User Manual: wiki.geekworm.com/X857_V2.0

UPDATE Notification:

1. The X857 has been updated to X857 V2.0 from X857 V1.2 version in Febuary 2021.

Some changes:

We removed the DC JACK power socket of X857 V1.2, X857 V2.0 is powered via USB 3.0 connector.
We use shorter copper spacer to connect Raspberry Pi 4 and X857 V2.0, which reduces the height of the entire product, so the matching metal case X857-C3 is shoter 3mm than X857-C1;
But if you use a metal shell like X857-C3, then you can only use 5.8G wifi AP, 2.4G wifi will not be available(be shielded by metal case);
As a Raspberry pi NAS device, we advised that you use ethernet network to replace wifi, this will be more stable and reliable.
UASP supported ONLY, X857 V2.0 DO NOT support TRIM.

2. The case of X857 V1.2 and X857 V2.0 are different. X857 V1.2 should use X857-C1 Case, but X857 V2.0 use X857-C3 Case.

Note: the Raspberry Pi 4, SSD and power adapter is not included in the packing list.

Overview

After continuously collecting customers' feedback, we have updated and released a new version of X857 V2.0 mSATA expansion board. It is upgraded from X855 (1st generation) and X856 (2nd generation) and X857 V1.2 (3rd generation). This X857 mSATA SSD Shield expansion board provides a complete storage solution for Raspberry Pi 4 Model B, only mSATA interface SDD hard disk is suitable for X857 mSATA SSD extension board; Support up to 1TB mSATA solid-state drive (SSD); Now it is time to build a mobile hard disk with a mSATA SSD for your Raspberry Pi 4 Model B.

Key Features:

Ideal storage solution for Raspberry Pi 4 computer - mSATA SSD Shield
Supports up to 2TB mSATA solid-state drive (SSD)
UASP supported for Raspberry Pi 4
Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
Integrated high efficiency step-Down Converter, 3.3V max 4A to power the SSD
Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying (see notes)
LED blue indicator indicates drive status
External self-powered or USB bus-powered
Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management
Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A)

Note:

1. A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition

2. Don't power your Raspberry Pi via the Pi's 40-pin header and Type-C power socket at the same time.

Document: wiki.geekworm.com/X857_V2.0

X857 V2.0 Specifications

For Use With	Raspberry Pi 4 Model B only
Operating System	All Raspberry Pi operating systems
Socket	mSATA interface
PCB Size	85mm x 56mm
Power supply	5Vdc +/-5% , Powered via Pi's USB port
Ports & Connectors	USB socket - USB 3.0 type A x1; 52P Mini PCI-E mSATA slot x1
Match Metal Case	X857-C3(ASIN:B08VJ6P48B), also support X735/X708 installation
Match Expansion Board	X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y)
Important Note	We are trying to solve the EMC interference issue between Raspberry Pi 4 and USB3.0 device ON X857 V2.0. But if you use X857-C3 metal case(ASIN:B08VJ6P48B ) , it is strongly recommend to use 5.8G wifi AP, 2.4G wifi maybe not available(be shielded by metal case);

How to select your power adapter

If you have a good quality USB Type-C power adapter, you can also use a TYPE-C power adapter to supply power through X735 Type-C port, otherwise we suggest you choose our power adapter with DC 5525 JACK.

Packing List:

1 x X857 V2.0 mSATA SSD shield
1 x USB3.1 jumper
6x Screw M2.5 *6mm
4x Spacer M/F M2.5 *7+6mm
4x Spacer F/F M2.5 *9.5mm


	X862 V2.0	X876	X825 V2.0	X883 V1.2	NASPi Gemini	NASPi
Compatible with	Raspberry Pi 4	Raspberry Pi 4	Raspberry Pi 4	Raspberry Pi 4	Raspberry Pi 4	Raspberry Pi 4
Support SATA / mSATA	M.2 NGFF SATA SSD 2280 Only	M.2 NVMe SSD 2280, 2260, 2242, 2230	Single 2.5" SATA HDD/SSD	Dual 2.5" SATA HDD/SSD	Dual 2.5" SATA HDD/SSD	Single 2.5" SATA HDD/SSD
Power Requirement	Powered via Pi 4's USB port, if use with X735, please power from X735.	Powered via Pi 4's USB port, if use with X735, please power from X735.	DC 5V/=4A - 5.5x2.5mm jack (ASIN: B07413Q5Y4)	DC 5V/=4A - 5.5x2.5mm jack (ASIN: B07413Q5Y4)	USB Type-C 5V/=4A	USB Type-C 5V/=4A
Stackable	X	X	X	X	X	X
Matching Metal Case (ASIN)	X857-C3 Case(ASIN:B08VJ6P48B)	X863-C1 Case	X825-C8 Case(ASIN:B092CYHQTL)	No Metal Case now.	NASPi Gemini Metal Case	NASPi Aluminum Alloy Case
Recommended Cooling Solution	X735 Board (ASIN: B07R45W1LN)	X725 Board	X735 Board (ASIN: B07R45W1LN)	X735 Board (ASIN: B07R45W1LN)	X882	X-C1 Adapter Board
Same Function Board for Pi 3B+/3B/2B	X860 M.2 NGFF SATA SSD	X870 M.2 NVMe SSD Board(ASIN:B07R6H4XXW)	X820 2.5" sata board(ASIN: B073CGQD9C) X820 metal case (ASIN:B07GRZRW7J)	X822(discontinued)	X822(discontinued)	X820 2.5" sata board(ASIN: B073CGQD9C) X820 metal case (ASIN:B07GRZRW7J)
PCB Size	8.7 x 5.6 cm	8.7x8.2 cm	10.7 x 8.5 cm	11.3x9.25cm

v Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, refer to Geekworm WiKi search(Does_the_X825/X855_support_USB_boot). v Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(:B08VJ6P48B ), BUT note the power control switch should be connect to X735(:B07R45W1LN)/X708(:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0. v How to power RPi 4&X857 V2.0: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port; v How to power RPi 4&X857 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC5525 Jack Power In port; Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (:B09J856PND). vX857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), UASP supported for Pi 4, NOT support TRIM, Supports up to 1TB mSATA interface SSD hard disk. v[Important] Strongly recommend to use 5.8G WiFi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also MUST format the new SSD before use.