Fsuoech 1.12" OLED LCD I2C Display Module 96x96 IIC Serial Port SH1107 and ESP8266 Development Board 1.12" OLED module+ESP8266 development board

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

Fsuoech 1.12" OLED LCD I2C Display Module 96x96 IIC Serial Port SH1107 and ESP8266 Development Board 1.12" OLED module+ESP8266 development board

Regular Price: US$41.99

Special Price US$34.99

Availability: In stock

Supplier: Fsuoech

Category: Electronics Video

Qty:

OLED discription: Name:Fsuoech 1.12 Inch 96x96 White-Light OLED LCD I2C module The Driver chip of this OLED is SH1107, which is compatible with IIC communication. So this module can be controlled by I2C. That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode. There is also a simple switch-cap charge pump that turns 3.3v into a hight voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project Features: OLED self-luminous, no backlight Size: 1.12¡± Driver IC: SH1107 Voltage: 3.3V DC Viewing angle: > 160¡ã High resolution: 96 x 96 Working Temperature: -30¡ãC~80¡ãC Color: White light Module Size: 38mmx30mm x6mm Screen material: glass, need good protection Interface Type: IIC/I2C-4PIN GND: Ground VCC: 3.3V SCL: I2C Serial Clock SDA: I2C Serial Data Applications: MP3, MP4, watch Head-mounted displays Meters and other intelligent instruments Design any pretty patterns for your beloved electronic devices! Note: OLED is self-luminous, no backlight needed! It does not respond when you just connect it to the mains, you have to program it and work properly, then it will display normally. ESP8266 Development board discription Support wireless 802.11b/g/n standard Support three working modes of STA/AP/STA+AP Built-in TCP/IP protocol stack, supports multiple TCP Client connections (5MAX) D0~D8, SD1~SD3: used as GPIO, PWM, I2C, etc., port drive capability 15mA AD0: 1 channel ADC Power input: 4.5V~7V, support USB power supply Working current: continuous transmission: approximately equal to 70mA (200mA MAX), standby <200uA Transmission rate: 110-460800bps Support UART/GPIO data communication interface Package Includes: 1pcs 1.12" OLED Display Module, 1pc ESP8266 board ,1pc TF card, 2pcs 4pin wires