DETERDEK PRO by Fila Surface Care Solutions. Detergent against incrustations based on buffered acid. Excellent for cleaning after construction work for removing cement residues. Ideal for porcelain stoneware, glazed ceramics, cotto, clinker bricks and acid-resistant materials. Container and yield: 1 litre canister. - 10-20 m² per litre DETERDEK PRO to Cotto, 1:5 diluted. - 40 m² per litre DETERDEK PRO on porcelain stoneware, diluted 1:5. - 20-35 m² per litre DETERDEK PRO on natural stone, diluted 1:5 to 1:10. The yield is a guide that also depends on the material. Benefits: - Versatile multi-purpose product. - Effective against construction site dirt and encrustation after installation. - Safe for health: does not develop harmful vapours as the acid is buffered. - Does not change the look of the material. - Does not affect the joints. - Protects surfaces and elements made of aluminium and steel. - Removes cement residue - Removes residue from grout with additives. - Effective against rust stains. - Rich in surfactants: dissolves encrustations and cleans at the same time. - Eliminates limescale deposits. - Excellent for indoor and outdoor floors. Use: Dilution: 1:5 to 1:10 depending on the dirt to be removed; 1:3 for the removal of residue from grout with additives. - For cleaning after construction work. 1. Wet the surface to be cleaned with water. 2. Dilute DETERDEK PRO 1:5 or 1:10 depending on the dirt to be removed. 3. Distribute the solution within a radius of a few metres. 4. Leave for 3-4 minutes. 5. Work the surface with a scrubber or a single-disc machine. 6. Remove the residue with a cloth or a wet vacuum cleaner. 7. Wipe the clean surface thoroughly with water. If traces of stubborn dirt remain, repeat the process with a more concentrated dilution of DETERDEK PRO. - For the extraordinary cleaning of exterior surfaces with signs of ageing (smog, blackening...) 1. Dilute one litre of DETERDEK PRO in 10 litres of water. 2. Follow the instructions above. Warning: - Not on acid-sensitive surfaces such as polished marble. - Always test the product on a small area before starting full treatment. - For aluminium elements, please follow the instructions and use a soft sponge.

Safe for your health: as a buffered acid, DETERDEK PRO does not develop harmful vapours and replaces hydrochloric acid. Against rust: DETERDEK PRO is effective against rust stains. Thorough cleaning: thoroughly cleans floors outdoors. As it contains many surfactants, it descales and cleans at the same time. Excellent against cracking: removes limescale deposits from floors, coverings (showers), sanitary ceramics and salt efflorescence on cotto and gives porcelain stoneware its original beauty. Residue of grout with additives: it is particularly effective in cleaning cement joints and joints even with additives. Versatile multi-purpose product: depending on the dilution, it cleans and dissolves encrustations, removes rust stains and can be used on various acid-resistant materials. Multi-material: ideal for terracotta, clinker brick, porcelain stoneware, glazed ceramics, acid-resistant stones. Dirt removal after construction works: the Deterdek Pro cleaner has been specially developed for the removal of residues after construction and laying work. Our products, listed in the most important cleaning and protection projects in the world, are recommended by more than 200 manufacturers in the stone and ceramic sector. Enlightened consumers who are only satisfied with the best for cleaning and treatment of surfaces choose FILA products. For more information about this product, please scroll down to the " field. DETERDEK PRO is an acidic cleaning agent, it removes encrustations after laying floor coverings or tiles and building site dirt.