Please do not return directly before asking for help if you meet the installing problem.

Step 1: Click "evonavi" Step 2: Click "Ask question" Step 3: Please send us pictures or videos of the technical or installation questions you met We will reply to you within 24 hours.

Support the original car amplifier

The Backup Camera Doesn't Work ?

After the installation is complete, please perform "Backcar Setting" first.(Backup Camera cannot be used normally if the “Backcar Setting”is not set)

* Make sure the rear camera is not damaged and check whether the camera is powered (12V);

*Camera settings (set according to the parameters of the original rear camera);

*Make sure the reversing cable has been successfully connected;

*If the power cable has a Canbus Box, please confirm that the cables of the Canbus Box and the Canbus Box are properly connected to the head unit.

Backcar Setting:

Car Settings / System Settings-Factory Setting( password: 1617) / Feature Setting - Cancel “Double recording”(Remove the symbol “v”) / Select:“Backcar Setting” / ”6158C_VIN3_REAR” / According to your original camera resolution, select the correct resolution in the format list: CVBS-NTSC, CVBS-PAL, AHD720P-25Hz, AHD720P-30Hz, AHD1080P-25Hz, AHD1080P-30Hz, TVI720P-30HZ / After the above Settings, please click Save, the head unit will automatically restart !

*If your backup camera resolution cannot be found in the above options, please purchase a backup camera that is compatible with this head unit.(ASIN:B0BTPPC5YY)

*If the reversing still cannot be used, please let me know your order number so that I can serve you better.

Package List

1x AHD camera

1 x Android Car Stereo 1 x RCA Input & Output

1 x Canbus Box & Power Cord 1 x GPS Antenna

1 x Radio Adapter 1 x Camera Input

2 x USB Data Cable( 4PIN & 6PIN) 1 x Instruction Manual

Note1:

• *To check if it fits your car, please measure the screen size, installation size and confirm the harness.
• Due to the different design of the car console, some can fit perfectly, but some cars need to buy a dash kit box/frame and dedicated harness/adapter if you want perfitly fitted.
• *Please unplug the battery cable before installing the car navigation system, otherwise the fuse may be blown. After installation, plug in the battery cable

Note2:

• If your speakers are not working,maybe it occur by harness you connected incorrectly;If your original car built-in amplifier,be sure to use a 4pin jack and connect the AMP amplifier cable on the power cable to the RCA AMP, otherwise just to plug the 8pin jack to your original car.